How is the 40" Height Measured on CE Smith Post-Style Guide-Ons

Question

Question:

Is the 40" length measured from the bottom of the galvanized upright to the top of the PVC upright? Thank you

asked by: Marty G

0

Expert Reply:

You are correct about the measurement. The CE Smith Post-Style Guide-Ons for Boat Trailers # CE27626 are measured from the bottom where it is galvanized to the top of the cap on the PVC pipes. This measurement is the overall height which is 40".

expert reply by: Robin H

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 7

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 8

Glad to hear you are liking the wheels, Wayne! With the lug holes being a bit recessed on the Kenda #KE22XJ you got, I recommend going with the DeeMaxx Trailer Wheel XL Lug Nut - Chrome - 1/2" - Qty 1 #DE23KR. This is 1-7/8" long and fits…

view full answer...

Answer 9

Hey Paul, thanks for reaching out. I think the Tie Down Roller Bunks #TD87FR are a good direction for what you are trying to fix. I would not mount them on top of 2x4 bunks though, since your main problem is already that the boat sits too high. The…

view full answer...

Answer 10

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 11

Welcome back, Ian! With a 3,500 pound Dexter E-Z Lube using the #L68149 inner bearing, you will want the Bearing Buddy Spindle Grease Seal Set #BB60002. This does also include the seal as well as the wear sleeve and will fit your 3,500 pound Dexter…

view full answer...

How is the 40" Height Measured on CE Smith Post-Style Guide-Ons

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching