What Size and Grade Bolts Should be Used to Install Titan Model 60 Brake Actuator
Published 09/24/2013
Question:
WHAT SIZE and CASE STRENGTH BOLTS DO YOU RECOMMEND. WILL BOLT NEW COUPLER ON. THIS TITAN SURGE COUPLER WILL REPLACE AN OLD WELDED ON SURGE COUPLER. THE OLD ONE LOOKED LIKE AN ATWOOD and WAS WELDED ON. OLD COUPLER WAS CUT and GROUND-OFF. REMAINING TRAILER TONGUE IS 3inch WIDE and APPROX 9s long. TRAILER: MADE MAY 1984. V/M CUSTOM BOAT TRAILER, GVWR = 5000 LBS., STOP CAPACITY- 3500 LBS. ALSO REPLACING THE BRAKE DRUM ASSEMBLIES WITH YOUR TITAN BRAKE ASSEMBLIES.
asked by: MEL H
Expert Reply:
The Titan brake actuator # T43397007K will take 1/2 inch by 4 inch grade 5 bolts, nuts, and lock washers. Since this is a boat trailer if you can find some grade 5 zinc coated or stainless steel they will have better corrosion resistance. I have linked a video review and the installation instructions for this actuator for you.
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Grease Seal - Double Lip - I.D. 1.688" / O.D. 2.332" - Older UFP Hubs/Marine Axles - Qty 1
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball - 20,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop - Drum - 2-5/16" Ball - Bolt On - 20,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop - Drum - 2-5/16" Ball - Bolt On - 12,500 lbs
- Search Results: surge brake actuator brake actuator
- Search Results: trailer safety chains
- Search Results: brake lockout
- Search Results: drum brakes brake actuator
- Shop: Trailer Hitch
- Shop: Towing Mirrors
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Shop: Dexter Hydraulic Brake Actuator w/ Drop and Electric Lockout - Drum - Zinc - 2-5/16" Ball - 20K
- Shop: Replacement Consumer Lockout Key for Dexter Axle Brake Actuators - Qty 1
- Search Results: ad2527e grease seal
- Search Results: dexter surge brake actuator
- Q&A: Recommended Trailer Wiring Harness for a Boat Trailer
- Q&A: What Gauge Wire Is The 30 ft. Wishbone 4-Way Trailer Wiring Harness A30WB?
- Q&A: Required Mounting Hardware For Titan Zinc-Plated Brake Actuator w/ Electric Lockout # T47457207K
- Q&A: What Hardware is Needed To Install Titan Zinc-Plated Brake Actuator On Trailer Tongue
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Brake Actuator
