What Hardware is Needed To Install Titan Zinc-Plated Brake Actuator On Trailer Tongue
Updated 03/02/2020 | Published 02/29/2020
Question:
Can you tell me what grade 1/2inch bolt I should use to bolt this Unit on to my boat Trailer? Grade 2, Grade 5 or Grade 8 ???
asked by: Bob
0
Expert Reply:
To bolt the Titan Model 20 to your trailer tongue you want to use 2- 5/8" by 4" grade 5 bolts, nuts and lock washers. If the tongue is a light weight tongue (narrower than 3" wide) you want to use spacer tubes inside for reinforcement when bolting on the actuator. I have attached a diagram of the standard mounting bolt pattern.
expert reply by:
Heather A
0
click to enlarge
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball - 20,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 20000 lbs GTW
- 2-5/16 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Q&A: What Gauge Wire Is The 30 ft. Wishbone 4-Way Trailer Wiring Harness A30WB?
- Q&A: Recommended Trailer Wiring Harness for a Boat Trailer
- Q&A: Troubleshooting A Non-Working Running Light On A Boat Trailer
- Shop: Dexter DB-35 Single-Wheel Disc Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K - 1-3/8" Spindle
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: CE Smith Tail Light Bracket - Aluminum - 10" Wide x 3" Tall - Right Side
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Shop: 4-Leaf Double-Eye Spring for 2,800-lb Trailer Axles - 20-1/2" Long
- Shop: 3-Leaf Double-Eye Spring for 1,400-lb Trailer Axles - 20-7/16" Long
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Q&A: Required Mounting Hardware For Titan Zinc-Plated Brake Actuator w/ Electric Lockout # T47457207K
- Q&A: What Size and Grade Bolts Should be Used to Install Titan Model 60 Brake Actuator
- Q&A: Mounting Hole Pattern of Curt C52042 Push to Test Trailer Break Away System Battery Box
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)