Compatibility Of The AMPLock King Pin Lock With A Turning Point Pin Box

Question

Question:

Hi, Will this lock work on a Curt Turning Point king pin? Thank you,

asked by: Antonio A

0

Expert Reply:

Yes, the AMPLock King Pin Lock for PullRite and Sidewinder 5th Wheel Pin Boxes # AMP87FR will work with your Turning Point pin box. It has a cutout to accommodate your wedge as well so that you don't have to remove it to lock up the king pin.

expert reply by: Kevin C

0

Answer 1

Hey Dennis, the pin weight you have of 2,240 lb is right in the sweet spot of the Curt Helux part #C75MJ as it has a minimum weight of 1,610 lb and a max weight of 3,500 lb so even if there was a replacement spring for it I wouldn't recommend…

view full answer...

Answer 2

The Trimax King Pin Lock #TMX56RR can still be used with your 5th wheel having a capture plate from PullRite. The capture plate mounts to the top of the kingpin and only takes up a similar amount of space that a Lube Plate #RP83002 would. If you…

view full answer...

Answer 3

I recommend the Trimax King Pin Lock for 5th Wheel Trailers in Red #TMX36RR or Yellow #TMX56RR. The bright colors allow you to easily see it is in place and helps to deter would be thieves. They both have a tamper resistant lock and fully incase the…

view full answer...

Answer 4

Hi Lisa; a lock like the #e49PR typically has enough room to fit even with a capture plate. I'm not entirely sure what yours looks like, you can send me a picture if you want and I can double check. It is also worth noting that the Patriot…

view full answer...

Answer 5

Hi Eric; the correct capture plate for the PullRite SuperGlide 5th Wheel Hitch #PUL83RR depends on the pin box on your 5th wheel. The manufacturer can identify it if you get the serial number off of the pin box sticker or you can measure the bolt…

view full answer...

Answer 6

The best option we have for a king pin lock that will work on a pin box with a capture plate/wedge installed is the AMPLock King Pin Lock for PullRite and Sidewinder 5th Wheel Pin Boxes part #AMP87FR. I have attached a video I did below.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Compatibility Of The AMPLock King Pin Lock With A Turning Point Pin Box

Featured Help Information

Miscellaneous Media

Continue Researching