Timbren Kit that Fits 2020 Fleetwood Bounder 35k

Question

Question:

Hello there. I am inquiring about your Jounce-Style Springs. I have a 2020 Fleetwood Bounder 35K. 22,000 GVWR. Your site recommends the Timbren item instead. Can you tell me if that is accurate for my rig since your reviewer recommends the Jounce-Style and I would prefer those. Thanks,

asked by: Stephen M

0

Expert Reply:

Yes, the Timbren front suspension kit part # TFFF53B is a fit for your 2020 Fleetwood Bounder 35k with a 22k capacity. For the rear kit then you'd want the part # TFRF53A.

expert reply by: Jameson C

0

Answer 1

Your Fleetwood Bounder 35K features a GCWR of 26,000 pounds so for the rear axle the SumoSprings Maxim Custom Helper Springs #SSR-187-54-1 will work perfectly to upgrade the rear suspension and stabilize the Ford F-53 chassis during travel. These…

view full answer...

Answer 2

We have just the parts you're looking for! To go with the Sumo Springs #SSF-170-40-2 on the front axle of your 2016 Fleetwood Bounder I recommend using the Sumo Springs Maxim Custom Helper Springs #SSR-187-54-1. I prefer these over the…

view full answer...

Answer 3

The recommended SumoSprings helper springs for your 2019 Fleetwood Bounder motorhome built on a Ford F-53 chassis are the SumoSprings Maxim Custom Helper Springs #SSR-187-54-1. These rear axle springs are the only SumoSprings that fit a Fleetwood and…

view full answer...

Answer 4

The SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-183-54-1 can be installed without removing the wheels on your 2014 Tiffin Allegro Open Road 36LA, but it will be more complicated because of restriction working room. I've attached a…

view full answer...

Answer 5

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 6

The Timbren #TFRF53A and SumoSprings #SSR-187-40-1 are very similar, which often makes it difficult to decide which is best. Both work independently to help compensate for off-center loads and reduce body roll when swerving and turning corners. They…

view full answer...

Answer 7

When comparing the ride quality between the Timbren #TFFF53B and SumoSpring #SSF-172-40-2 I recommend going with the SumoSprings. Although Timbren is a very solid product, the SumoSprings have been proven to have more of a forgiving support over the…

view full answer...

Answer 8

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Timbren Kit that Fits 2020 Fleetwood Bounder 35k

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching