What Type Of Threads Does The Replacement Barrel Nut For Thule Upride Bike Rack Have?

Question

Question:

Does this barrel nut have M6 thread is it compatible with M6 T-bolt screws?

asked by: Dino D

0

Expert Reply:

Yes, the Replacement Barrel Nut for Thule Upride Bike Rack # 1500050208 has an M6 thread, and will work with M6 T-Bolt screws like the Replacement M6x35 Square Head Bolt for Thule OutRide, ProRide, ProRide XT, UpRide Bike Racks # TH33RV.

expert reply by: Bryce D

0

Answer 1

Both the Replacement Cam-Action Non-Locking Lever #TH23AD and the Replacement Cam-Action Lockable Lever #TH46FW work with the Thule ProRide XT Roof Bike Rack #TH598004. The difference is that one is lockable and one is not. The Replacement Axle Nut,…

view full answer...

Answer 2

The diameter of the barrel nut #853-0446 is 3/8 inch and the length is 1/2 inch.

view full answer...

Answer 3

To replace the rubber strips in the top of your 53" Thule WingBar Evo Crossbars #TH711420 you need the Replacement QuickAccess Interface Top T-Track Strip #1500052989. This comes with both sides of the strip, but it is one piece so you will need…

view full answer...

Answer 4

The part number you mentioned is the Subaru/Thule Aeroblade crossbar so for a replacement rubber strip you would need the part #TH69JH.

view full answer...

Answer 5

I believe what you're looking for is the Replacement QuickAccess Interface Top T-Track Strip #1500052989. This comes with two strips, and will install in the top T-Track on your Thule WingBar Evo cross bars.

view full answer...

Answer 6

Your original Thule ProRide XT #TH598004 was designed to fit on square bars or the Thule pro bar, but not aero style bars, so there's not going to be an adapter to allow for this. With that said, if your new car has an aftermarket kit that has…

view full answer...

Answer 7

Yes, the channel attachment hardware of the Thule ProRide XT part #TH598004 that you referenced will fit the top channel of a Yakima Jetstream crossbar like you have.

view full answer...

Answer 8

Both your Thule UpRide #TH599000 and ProRide XT #TH598004 roof bike racks would have come with hardware to mount them directly to OEM instead of the T-Slots, but if you've misplaced the hardware we have replacements which you can find listed…

view full answer...

Answer 9

Thank you for the info! The Thule ProRide XT Roof Bike Rack #TH598004 fits crossbars up to 3-1/8". The Rhino-Rack Crossbars #RRVA137S-2 have a width of 3-1/8". These two parts have been confirmed to fit, so you shouldn't have any issues…

view full answer...

Answer 10

It sounds like you might need the #TH33RV which is an M6 bolt that is 35mm long and will allow you to mount Thule bike trays to the Aeroblade crossbars.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Type Of Threads Does The Replacement Barrel Nut For Thule Upride Bike Rack Have?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching