What is Difference Between 7 and 8 inch Monitor Version of GCH Third Brake Light Camera

Question

Question:

Wondering what that difference is between the camera for the 7 inch screen and the 8 inch other than a huge price difference.. i have a 2018 Silverado 2500 LTZ 6.0 is there any difference at all?

asked by: Nicholas

0

Expert Reply:

The GCH third brake light camera for an 8 inch GM monitor that fits your 2018 Chevy Silverado 2500 is the part # 3460010 and for a 7 inch monitor # 3460011. The cameras are basically the same but the connectors and connections that need to get made are different.

expert reply by: Jameson C

0

Answer 1

I have attached a couple images below of the installation manual for the GCH Truck Bed Cargo Camera #3460010 that you referenced. I have also included a full install video on the 2018 GMC Sierra that you can follow along with.

view full answer...

Answer 2

The best way to determine if the Truck Bed Cargo Camera #3460010 will give you visibility of your Silverado 3500's gooseneck ball is to attach a piece of string about an inch below the OEM 3rd brake light. This is where the camera lens will be…

view full answer...

Answer 3

The Furrion kit part #FR67FJ and the #FR24FJ are the same except the #FR67FJ has LED mood lighting on it.

view full answer...

Answer 4

Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...