Can the Buyers Products Trailer Hitch Ball for Pintle Mounts be Used w/ a Standard Coupler?  

The correct torque for the Replacement Ball with Nut For Buyers Combination Pintle Hook part #337RB2516 is 350 ft. lbs. per Buyers.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

If you're saying that you need a 2-5/16" hitch ball with a 3" long shank then we do offer the Buyer Products #337RB102516. The shank is 1-1/4" in diameter and has a 20,000lb towing capacity.

The Buyers Products 10 Ton Combination Hitch with Mounting Kit #33710057 has hole diameters of 5/8 inches. They are spaced 3-3/8 inches and 1-3/4 inches on center. I've attached a photo to assist as well as a video.

The correct hardware to use with the Buyers Products 3 Position Pintle Hook Mount part #337PM25812 will largely depend on what accessory will be attached to it. For example, the Buyers Products 10 Ton Combination Hitch with Mounting Kit part…

I attached a picture that has all of the mounting hole dimensions for the Buyers Products 10 Ton Combination Hitch with Mounting Kit #33710057 for you to check out. The distance between the two vertical mounting holes is 1-3/4 inches and the distance…

Surge brakes use a hydraulic actuator to push fluid to the cylinder piston to activate the brake shoes on drum brakes or brake pads on disc brakes. This pressure should only be applied when weight is pushing against the hitch ball, so no pressure…

It looks to me that you will want additional spacers to provide better weight distribution on your 2019 Ram 1500. The Fast Way e2 Weight-Distribution Hitch #FA94-00-1061 is capable of having up to 9 spacers to provide the correct pinion angle on the…

The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…