How Much Torque Needs To Be Applied to the Pintle Hitch Ball with 2-5/16" Diameter

Question

Question:

i recently ordered this product, part number 63052, i would like to know what the torque specification is on the part. Thanks, Donnie

asked by: Donald M

0

Expert Reply:

The Pintle Hitch Ball with 2-5/16" Diameter part # 63052 has a 1-1/8" diameter shank so the nut will need to be torqued to around 350 ft lbs.

expert reply by: Conner L

0

Jeff

4/25/2025

Are these metric threads and what size socket should I use to properly torque this nut?

Jameson C.

5/7/2025

@Jeff The threads of the # 63052 are not metric and the socket size needed for the nut is 1-5/8 inch.

Answer 1

Yes, the Buyers Products Trailer Hitch Ball item #337RB2516 can be used with a standard ball couple when it is mounted with a Pintle Hook like the item #337RM62516. Just to add the Pintle hitch ball you were referencing the Buyers Products…

view full answer...

Answer 2

The correct torque for the Replacement Ball with Nut For Buyers Combination Pintle Hook part #337RB2516 is 350 ft. lbs. per Buyers.

view full answer...

Answer 3

The choice of oil bath or regular hubs is up to the manufacturer. They are usually found on higher capacity axles, though as you know there are some on lower capacity axles. You can convert some hubs from grease to oil bath using a kit such as…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 9

Hello Ben, Thanks for writing in! Yes! The WeatherTech Front Auto Floor Mats #WT54TZ you were looking at are made specifically for the factory vinyl floor in your 2026 Ram 2500. For the rear, WeatherTech does not have a matching custom-fit rear mat…

view full answer...

How Much Torque Needs To Be Applied to the Pintle Hitch Ball with 2-5/16" Diameter

Continue Researching