Side Jack Mounting Hardware for a 2021 Bass Tracker 175 TXW

Question

Question:

Hello I need the u bolts and nuts for my jack on my bass tracker 175 TWX. Your website is so complex i cant find them anywhere but you must have them... I have a 2021 Bass TRacker 175 TXW

asked by: Matthew

0

Expert Reply:

Thanks for the picture! I would be happy to help you. To mount your jack to your Bass Tracker 175 TWX trailer you will need the Mounting Hardware for Dutton-Lainson Bolt-On Trailer Jacks item # DL22443. This kit includes four 3/8"-16 bolts that measure 4 inches in length. I have linked a diagram I made of the back piece of the mounting bracket so you can confirm this will fit your boat trailer.

expert reply by: Jerred H

0

Side Jack Mounting Hardware
(click to enlarge)

Bass Tracker Boat Jack
(click to enlarge)

Answer 1

The Ark Extreme Off-Road Swing-Up Jack #ORJW350D fits a wide variety of trailers. The mounting bracket will measure 7-1/2" tall x 5-1/2" wide. The vertical holes are 3/4" apart and the horizontal holes are 1" apart. This makes it…

view full answer...

Answer 2

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

view full answer...

Answer 3

Hey Hank, welcome back. You can email that picture directly to the email you receive this response from. I saw you previously purchased the Dutton-Lainson Boat Trailer Jack item #DL22210. What you're describing sounds like the Replacement…

view full answer...

Answer 4

Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs Item #MJ-1000B-MBB will actually be perfect for you. I checked the specs on the actual jacks that come with this hardware and it is basically identical…

view full answer...

Answer 5

You can replace the mounting bracket and hardware on an #FXP10W0301 or #MJ-1200B, but the tube and swivel bracket are not available as replacement parts for these jacks. You can use the Replacement Mounting Kit for etrailer and Ram Swivel Marine…

view full answer...

Answer 6

The bolts for the mounting hardware that comes with the Round Swivel Marine Jack w/ Wheel #MJ-1500B have an overall length of 4 1/4" and the thread is 3/8-16 course threaded. If you are needing new hardware for this jack then we actually have…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Side Jack Mounting Hardware for a 2021 Bass Tracker 175 TXW

Products Featured in This Question

Continue Researching