Disc Brake Kit Compatible With Lippert 8,000 Torsion Axles
Updated 04/06/2022 | Published 04/04/2022
Products Featured in This Question
Question:
Does this part fit lippert 8k torsion axles? Im looking for a brake disc conversion but I am having trouble looking at what will fit my axels.
asked by: JASON P
Expert Reply:
Yes, the Kodiak Disc Brake Kit # K2HR858AE will fit your Lippert 8,000lb torsion axle. Your Lippert axle uses a #42 spindle which is what the Kodiak brake kit is designed to fit. Do note that this kit uses 5/8" wheel studs and you may have 9/16" or 5/8" studs on your Lippert axle. Please let me know if you only have 9/16" lugs. You will need the Bearing Kit # DBRKHW850 to complete the hub. And I do recommend keeping an extra Grease Cap # KPCAP on hand in the event it becomes damaged or the Center Plug # KO54FR falls out.
The Kodiak Synthetic Bearing Oil # XLPROLUBE is needed to fill the oil bath hubs. You will likely need one bottle per axle and it is a good idea to keep a spare bottle with the spare cap that I mentioned above for topping off in case of leaks.
I can help you locate a surge brake assembly or electric over hydraulic actuator and all the brake lines needed if you can give me some more information about your trailer.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8,000-lb AL-KO/Quality
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Bright Way Trailer Breakaway Kit with Charger, LED Tester, and 5 Ah Battery - Side Load
- Shop: Bright Way Trailer Breakaway Kit with Switch and 0.5-Amp Charger
- Shop: Lippert Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Curt Trailer Breakaway Kit with Trickle Charger, LED Tester, and 5 Ah Lead Acid Battery - Top Load
- Shop: Bright Way Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 7K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 5.2K
- Search Results: trailer hubs and drums
- Search Results: trailer brakes accessories and parts
- Search Results: hydrastar
- Search Results: trailer brakes
- Q&A: Disc Brake Kit Recommendation for Lippert 8k Torsion Axle
- Search Results: tuff
- Search Results: remote
- Search Results: disk brake kit
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Brake Controller
- Q&A: How Much Torque is Applied to a Kodiak Grease Cap for Installation
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Replacement Plastic Cap and Seal for 8K EZ Lube Axle
- Video: Ultimate Overview of the Brophy Cable Camper Jack
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: How to Choose a Trailer Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Accessories and Parts
