How To Control Screen Brightness On Curt TriFlex Trailer Brake Controller

Updated 04/05/2022 | Published 04/04/2022

Question:

Did initial setup without connecting to trailer. Unit is mounted at an angle to the bottom right of steering wheel. My issue is that the display is dim and not readable. Would appreciate some help. My model is the C24VV

asked by: Edward L

Expert Reply:

I have attached for you below an excerpt from the manual on the Curt TriFlex Trailer Brake Controller part # C24VV which goes over the brightness settings. Please let me know if you have any other questions.

"Slowly tilt the front of the TriFlex to about 45° and the brightness of the bulb will increase corresponding with the output shown by the brake controller. Slowly tilt the front of the TriFlex back to level and the brightness of the bulb will decrease corresponding with the output shown by the brake controller."

expert reply by: Conner L