Silver Dexstar 17-231 15x5 w/ a ST 205/75D15 Radial Tire

Question

Question:

im looking for a spare rim and tire for my trailer. I would like a Dexstar 17-231, silver, 15x5 JJ 2200LB rim with a Kenda ST 205/75D15 tire. tire brand isnt important though

asked by: Ben H

0

Expert Reply:

We have the Dexstar 17-231 rim. It is the Dexstar Steel Mini Mod Trailer Wheel item # AM20436 you were looking at. However, we do not have it in a wheel and tire combo. This is the 017-231-2J model which is 15" diameter x 5" wide and has a 5 on 4-1/2" bolt pattern.

A great ST 205/75D15 tire for this wheel will be the Kenda Karrier Radial Trailer Tire - Load Range C item # AM10244. It has a maximum load of 1,820 lbs at 50 psi per tire. This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.

You will also need the Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi item # AM20903.

expert reply by: Jerred H

0

Answer 1

According to my research your Dexstar 017-604 15 x 5 JJ wheel either has a 5 on 4-1/2" bolt pattern or a 5 on 5" bolt pattern. The most common is a 5 on 4-1/2" bolt pattern like what we see with part #AM20436 so if I had to guess I…

view full answer...

Answer 2

It sounds like you are looking for the Dexstar Steel Mini Mod Trailer Wheel part #AM20436 which matches all the specs in the photo you attached. The manufacturers part number for this wheel is also 017-231.

view full answer...

Answer 3

I believe I have found the replacement wheel you are looking for. It's kind of hard to see in our product pictures but the Dexstar Steel Mini Mod Wheel part #AM20443 has a sticker on it that reads 17-231 and is a 15 inch diameter wheel with a 5…

view full answer...

Answer 4

I like your idea of finding a thin washer so that you get a snug, but not too tight, fit that allows you to fit the cotter pin through. Typically a washer isn't needed but it sounds like your hub is the perfect storm of being right between two…

view full answer...

Answer 5

When it comes to The Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89 inch Long - 3,500 pounds #35545I-ST-89 it is not a direct replacement but it will work for your Carry-On 6x12 utility trailer. This axle has a underslung design-…

view full answer...

Answer 6

We may not have a straight axle solution but we do have axle-less options. I have included a link to them for you. The great thing about these systems is that they have the suspension built in, sort of like a torsion axle. And ground clearance is…

view full answer...

Answer 7

Yes, you can install a 7-way trailer connector on your 2009 Toyota Tacoma. There's a couple of options depending on your trailer. First you're going to need to start with a 4-way flat connector like you've already found. I suggest the…

view full answer...

Answer 8

Curt adjustable ball mount #C45900 is made overseas but we do have some adjustable ball mounts that are made here in the USA such as #BWTS10040B or #AM3298. I have linked video reviews of both of these ball mounts for you.

view full answer...

Answer 9

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Answer 10

No, you can't. I contacted B&W this morning and was told they do not sell the components of their tow and stow ball mounts separately. While you are most likely correct and they are probably interchangeable, B&W wants you to buy a new…

view full answer...

Answer 11

Hey Trevor, The Curt Adjustable Ball Mount #C45902 does not offer a 1-7/8" ball option. It is specifically designed for a 2" or 2-5/16" ball. If you are needing an adjustable ball mount with the 1-7/8" ball included for a…

view full answer...

Answer 12

There is not a rule on how much clearance you need. It really comes down to the terrain you are driving over. For general use however having 10-11 inches of clearance will be sufficient when using the B&W Tow & Stow 2-Ball Mount part…

view full answer...

Silver Dexstar 17-231 15x5 w/ a ST 205/75D15 Radial Tire

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching