Operating Instructions On Flat Towing A 2018 Chevrolet Silverado
Updated 03/30/2022 | Published 03/28/2022
Products Featured in This Question
Question:
Once I’m hooked up to our Blue Ox and have the brake “box” in place, I turn off the engine leave in auxiliary position, the steering wheel and I assume wheels no longer turn freely.
asked by: John J
Helpful Expert Reply:
To flat tow your 2018 Chevrolet Silverado, you'll want to follow these steps:
1. Place vehicle that is being towed behind the tow vehicle on a flat level surface.
2. Attach the vehicle being towed to the tow vehicle.
3. Put the parking brake on.
4.Shift transfer case into neutral, please note that there shouldn't be any movement of the vehicle while shifting.
5. Turn the engine off.
6. Disconnect the negative battery cable .
7. Shift the transmission into park.
8. Move the steering wheel to make sure the steering column is unlocked.
9. With a foot on the brake pedal, keep the ignition key in the towed vehicle in the ACC/ACCESSORY to prevent the steering column from locking.
As long as you follow these steps, you will not have any damage to your vehicle. It also should be noted that if your truck is 2WD that it should not be flat towed under any circumstances, as the drivetrain components could be damaged.
Additionally, if you do not want to constantly disconnect the negative battery cable each time you want to flat tow, you can install # RM-766 if you have a gas engine, or # DW05312 if you have a diesel engine.
Product Page this Question was Asked From
Deka Lead Quick-Disconnect Battery Terminal - Universal Polarity
- Wiring
- Wire Connectors
- Quick Disconnects
- Deka
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Shop: Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: Roadmaster Battery Charge Line Kit for Motorhomes
- Shop: Vehicle Tow Bar Brake System
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Search Results: diode kit
- Video: How to Install the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit on a 2017 GMC Sierra 1500
- Shop: Base Plate for Tow Bar
- Video: Installation: Roadmaster Battery Charge Line Kit for Towed Vehicles on a 2017 Chevrolet Colorado
- Q&A: Do You Need To Disconnect The Battery On A 2019 Cadillac Escalade While It Is Flat Towed
- Search Results: rm 15267
- Search Results: trailer lights
- Search Results: 7 way plug tester
- Shop: Deka Lead Quick-Disconnect Battery Terminal - Universal Polarity
- Shop: Blue Ox Towed Vehicle Battery Charge Line Wiring Harness
- Shop: Roadmaster Universal Hy-Power Diode Wiring Kit
- Video: Detailed Breakdown of the Deka Lead Quick-Disconnect Battery Terminal
- Video: Complete Breakdown of the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Video: An In-Depth Look at the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles
- Video: DIY 2023 Ford Maverick Installation for the Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Video: Roadmaster 4-Diode Universal Wiring Kit Installation - 2017 Chevrolet Silverado 1500
- Search Results: rm88400
- Search Results: tow bar
- Q&A: Complete Flat Towing Setup for a 4 Wheel Drive 2017 Chevrolet Silverado 1500
- Q&A: Instead of Brake Light Relay for Flat Towing Could Vehicle Battery Be Disconnected
- Q&A: Why Must the Negative Battery Cable Be Disconnected on a Jeep Wrangler to Flat Tow
- Q&A: Recommended Demco Flat Tow Parts for a 2025 GMC Sierra 1500
- Q&A: Does Negative or Positive Battery Post Get Disconnected for Roadmaster Battery Disconnect
- Q&A: How to Disconnect the Battery on a 2021 GMC Sierra with Diesel Engine
