Is Pop & Lock PL34FR The Same as PL8547TAC

Question

Question:

Is your part PL34FR the same as Pop and Lock part # PL8547TAC? I see the pdf instructions labeled as such and want to be sure before I purchase. Thanks in advance for your time.

asked by: Trecia L

0

Expert Reply:

Yep, like the directions say, the part PL8547TAC is the same as the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness - Power - Black # PL34FR.

This part is a fit for your 2018 Toyota Tacoma as well, giving you added protection for the contents in your truck bed.

expert reply by: Kyle S

0

Answer 1

It is possible to combine a tailgate lock and a lock for a Leer camper shell. The best way to do this is to use the Pop & Lock Custom Tailgate Lock #PL34FR, which will work with the factory keyless entry system on your 2017 Toyota Tacoma. You can…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Paul! You do not need a wiring extender to use the Pop & Lock Custom Tailgate Lock #PL34FR or #PL54FR. Both have enough wire to work with your 2023 Tacoma Sport long bed.

view full answer...

Answer 5

I have linked the installation instructions for the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness #PL34FR below. You will want to see page 7 to locate where the plug and play harness ties into the factory wiring behind the…

view full answer...

Answer 6

Yep you have the right harness, just the Pop and Lock harness #PL34FR has been updated allowing it to work with multiple years of the Toyota Tacoma which has added a few more connectors. You'll use the purple and grey wires if installing on the…

view full answer...

Answer 7

Wire colors aren't specified when installing the #PAL8250 because we have found that the wire colors can sometimes change so the only consistent way to install the unit is to test the wires for the correct function. That being said, according to…

view full answer...

Answer 8

The Pop and Lock #PAL9555 is designed to replace your existing handle with a new locking handle, so your existing handle will be obsolete, as will the keys. This kit comes with new keys that will still allow you to manually lock and unlock your truck…

view full answer...

Answer 9

Hi Joe, Unfortunately Pop & Lock's camper shell locks only work with cable-style locks and not models with connecting rods. The only replacement option we'd be able to offer would be just a standard T-handle or cam lock and would need…

view full answer...

Answer 10

Because your A.R.E. Topper has the actuating rods instead of a wire pulley setup you'll need to use the Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers #PAL9000, which will replace your old rotary latch. The actuating…

view full answer...

Is Pop & Lock PL34FR The Same as PL8547TAC

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching