Lug Nut Size For Lippert 814202 6,000LB Drum Brake Hub

Question

Question:

Hi, Im looking for lug nuts for my 814202 Lippert hub. They are definitely not 12 - 20, but very close. Can someone please help me find them? Thanks

asked by: Jim S

0

Expert Reply:

I reached out to Lippert who was able confirm that your Hub 814202 only came with the 1/2"-20 wheel stud for a 1/2"-20 Lug Nut # CE11051.

Unless the studs were changed or the studs/lug nuts are stripped there should not be any fitment issues with these.

expert reply by: Bud M

0

Answer 1

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 2

I would be happy to help you upgrade your 2019 Grand Design Imagine 2600RB Travel Trailer's axle's suspension and wheels/tires. Keep in mind that replacing your axles will not increase the GVWR of your trailer. You will still be limited to…

view full answer...

Answer 3

20 year old leaf springs on a trailer could easily stretch 3/4 of an inch. Going with a 25-1/4 inch spring like you mentioned would be great. Since your springs are 3 inch in diameter that would indicate that most likely you have a 5,200 lb axle as…

view full answer...

Answer 4

As long as the frame itself can handle the additional weight, you would need to upgrade all of the other components under that weight capacity including the coupler. I recommend using the Timbren Axle-Less Suspension - Spindle Only - Regular Tires -…

view full answer...

Answer 5

Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…

view full answer...

Answer 6

Hey Phil! Thanks for getting back to me with those measurements! We have a leaf spring that is an exact replacement but I am guessing it's the pricey one you referenced. It is the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4"…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Lug Nut Size For Lippert 814202 6,000LB Drum Brake Hub

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching