Replacement Pitch Arm for Forest River Grey Wolf 25RRT With Solera Awning

Question

Question:

Im looking for a replacement Pitch arm for Solera awning on a Forest River Grey Wolf 25RRT. I see you have a 69 version but when I measure the one I have its 49 from bolt hole to bolt hole. Here is the only sticker with some information on it. Hardware REGALBK-69-V000431847. mfg. 07/24/2020 AND RPO-0004558069. Any help would be great! Thanks,

asked by: Brady

0

Expert Reply:

Thank you for the part number you found, based on that we know that the correct replacement pitch arm is the part # LC375994 that you referenced.

expert reply by: Jameson C

0

Answer 1

Hey Pierre, it looks like the Solera 3000 uses either a 63 inch or a 69 inch pitch arm so if you have the 69 what you would want is the part #LC375994 or for 63 inch #LC62NJ. Can you measure yours for me?

view full answer...

Answer 2

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 3

You will want to measure the length of your current Solera awning pitch arms and match up the correct size on the link I attached for you. Based on the photo you attached, you will likely need one of the following sizes: -Replacement Pitch Arm…

view full answer...

Answer 4

When you go to install the Replacement Pitch Arm part #LC375994 you'd need to go with three of the retaining washers #LC431583.

view full answer...

Answer 5

Thanks for the photos, and from that it looks to me like you are asking if just the pitch arm assembly is available, and if so, the answer is yes, it is the Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning Support Arm…

view full answer...

Answer 6

Sorry to hear that! You will want to go over to the other side and measure the one that isn't broken. If the pitch arm is 33" then you'll need the Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black…

view full answer...

Answer 7

In order to find the correct replacement arms for your 2016 Shasta Oasis you're going to need to measure the overall length of current pitch arms. If that length is accurate, then you are going to need the, Replacement Pitch Arm for Solera Flat…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Pitch Arm for Forest River Grey Wolf 25RRT With Solera Awning

Product Page this Question was Asked From

Continue Researching