Parts Needed to Go From a 4-Bolt Hub to a 5-Bolt Hub on a Dexter 1,800 lb. Axle
Updated 03/24/2022 | Published 03/23/2022
Products Featured in This Question
Question:
Interested in replacing the 4-bolt hubs with 12inch wheels/tires on my Dexter P-12 axle to 5-lug to be able to use 13inch wheels/tires. Can you recommend parts needed for this swap? Thank-you.
asked by: LeRoy P
Expert Reply:
For your Dexter axle you will use either the Trailer Idler Hub Assembly # AKIHUB-545-2-LF-2K (for bearing size L44649) or the Trailer Idler Hub Assembly # AKIHUB-545-2-LF-1K (for bearing size L44643). You would just want to pull off your current hub and check which bearing you have.
I have linked our selection of 13" wheels and tires that will fit either of the above hub assemblies.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: dexter trailer hubs and drums
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Spec Review
- Q&A: How to Identify Needed Replacement Hubs for Adams Manufacturing Drift Boat Trailer
- Q&A: Grease Recommendation for Pre-Packed etrailer Hub # AKIHUB-545-2-EZ-2K
- Q&A: Replacement Hub for Adams Trailer with Dexter EZ Lube Axles with Bearings L44649
- Search Results: trailer hubs and drums
- Video: Feature Breakdown: Trailer Spindle Nut 1"
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-545-2-EZ-2K
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Search Results: ez lube hubs
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly
- Search Results: trailer bearings races seals caps
- Search Results: boat trailer wheels accessories and parts
- Search Results: dexter trailer hubs
- Search Results: dexter ez lube
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Hubs and Drums
