Grease Recommendation for Pre-Packed etrailer Hub # AKIHUB-545-2-EZ-2K
Updated 10/27/2025 | Published 03/22/2025 >
Question:
I bought a hub set that is pre packed with bearings and blue grease. I want to use the same kind of grease that you used to load up the bearing buddies but Im not sure what kind of grease you used. The website says lithium complex multipurpose greasefoot but Im wondering if you can be more specific as to what brand and type you used?
asked by: Todd M
Expert Reply:
Hey Todd, for a multipurpose lithium based grease like what is in the hub part # AKIHUB-545-2-EZ-2K what you'd need is the Dexter Lithium Grease part # DX64TR and you'd be set.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: marine grease gun
- Search Results: tire cover
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Trailer Wiring
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Shop: Trailer Hitch
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Shop: Hydraulic Trailer Brake - Uni-Servo - Free Backing - 10" - Right Hand - 3,500 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Spare Tire Cover
- Q&A: Pre-Greased Idler Hub that Fits Adams Boat Trailer
- Video: What to Know About the Trailer Hub Assembly
- Q&A: Parts Needed to Go From a 4-Bolt Hub to a 5-Bolt Hub on a Dexter 1,800 lb. Axle
- Search Results: dexter trailer hubs and drums
- Q&A: Replacement Hub and Bearing Kit For a Carry On Trailer With Dexter 8-259 Idler Hubs
- Q&A: Determining Which Replacement Hub Fits Carry-On 5 x 8 Utility Trailer With 2000lb GVWR
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Spec Review
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Search Results: trailer hubs and drums
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-545-2-EZ-2K
- Video: Feature Breakdown: Trailer Spindle Nut 1"
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Search Results: 13 inch wheel trailer hubs and drums


Jameson C.
10/27/2025
Hey Todd, how did things go with the Dexter lithium grease for your hub setup? Your feedback could really help others looking to match the same grease type for their bearing buddies.