Do Yakima JetStream Crossbars Come With The Hardware To Mount To Yakima Timberline Towers

Question

Question:

Do the Yakima jet stream bars come with all the hardware needed to mount on the Yakima Timberline towers?

asked by: Eugene K

0

Expert Reply:

Yes, the Yakima JetStream Crossbars Aluminum - Black - 50" Long - Qty 2, part # Y00425, will come with the necessary hardware to mount to the Yakima Timberline Towers.

expert reply by: Mark Smith

0

Answer 1

Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions and profile so they are interchangeable.

view full answer...

Answer 2

To replace your seat for the Timberline Towers, you'll need part #8880637 which includes a seat and adapter to attach the JetStream Crossbar.

view full answer...

Answer 3

No, you cannot use Yakima Timberline Towers #Y33TR with Thule crossbars; you must use the same brand for the roof rack system as different brands are not made to be compatible with each other. The only parts that may be compatible among several…

view full answer...

Answer 4

What you need is the Universal MightyMounts for Yakima Roof Mounted Accessories #Y03590. These mounts will fit ski racks made as early as 1990 and are the most likely option for adapting your older Yakima ski rack to your JetStream cross bars.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Do Yakima JetStream Crossbars Come With The Hardware To Mount To Yakima Timberline Towers

Product Page this Question was Asked From

Continue Researching