Correct MORryde Quick Connect RV Steps for a Trailer with 35 Threshold Height

Question

Question:

I have 35 height from RV door to ground. Which Morryde step should I purchase. STP54-012 or STP54-010 Thank you

asked by: George F

0

Expert Reply:

The correct MORryde Quick Connect RV Steps for a 35" threshold height is part # MR32JR.

expert reply by: Conner L

0

Answer 1

Hey John! With four steps the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is likely the better choice over the short #MR54RV. I went ahead and attached the full dimensions of both below so you can see what you think will fit best on your…

view full answer...

Answer 2

The widest point of the Lippert #LC733932 Solid Step is 24 inches, which is the dimension from the outside of one stringer to the outside of the other. The latching mechanism that holds the steps folded upright into their storage position is width…

view full answer...

Answer 3

It sounds like you are definitely on the right track here. The #MR79ZR is indeed the correct suspension upgrade kit for your 2007 Colorado 5th wheel with LRE suspension. Moryde makes a fantastic suspension upgrade kit. The heavy duty shackles and wet…

view full answer...

Answer 4

The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways will be correct for a 2020 Grand Design Momentum 29G. That said, you'll need to measure the entry height to get the correct model; part #MR26RR for 25-29", part…

view full answer...

Answer 5

Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…

view full answer...

Answer 6

Yes we do offer the replacement hardware kits for the MORryde steps with the part #MR32HR which is the bracket at the bottom of the door.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 11

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Correct MORryde Quick Connect RV Steps for a Trailer with 35 Threshold Height

Product Page this Question was Asked From

Continue Researching