Can 6-Way Be Added to Blue Ox Tow Bar Wiring Kit for Jeep Wrangler

Question

Question:

Blue Ox Tow Bar Wiring Kit Item # BLU79FR 2021 jeep wrangler willys With tow package. I would also need to change connection to 6 pin with battery charge line 12v. Can this be done? Is there an installation video anywhere

asked by: Peter

0

Expert Reply:

Yes, you can cut off the 4-way that comes on the Blue Ox Tow Bar Wiring Kit part # BLU79FR and use the connector from the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord part # BX88206. If you need a charge line I like the Towed Vehicle Battery Charge Wire Kit part # DM66VR.

expert reply by: Conner L

0

Answer 1

The (discontinued) Tekonsha Tail Light Isolating Diode System TR118821 is a reliable kit but it isn't what I would recommend for your 2023 Jeep Gladiator because there are similar kits that are easy to install or are built much better than this…

view full answer...

Answer 2

The Blue Ox 4-diode tow bar wiring kit #BX8848 that you have installed in your JL Unlimited will not cause issues with the brake lights on the Jeep since it will be in Tow Mode when you are flat towing it. This will allow the motorhome to control the…

view full answer...

Answer 3

Since there's currently only T-Connector style trailer wire harnesses available for your 2021 Jeep Wrangler Unlimited and you already have a T-Connector style dinghy wire harness you have two choices: Option 1: You can use the T-One Vehicle…

view full answer...

Answer 4

Yes, both the Blue Ox tow bar wiring kit part #BLU79FR and the Curt trailer wiring kit part #56407 can install at same time on your 2023 Jeep Wrangler Unlimited and the order in which they install does not matter at all.

view full answer...

Answer 5

Yes, the Curt Custom Tail Light Wiring Kit #C96JR will also connect with the T-One Vehicle Wiring Harness #118786 on your 2023 Jeep Wrangler JL. These all use the same style factory connectors so they will plug in line of each other. If you have any…

view full answer...

Answer 6

You can use the Blue Ox #BLU79FR which is custom fit for your 2022 Jeep Wrangler to provide tow bar lighting and is perfectly compatible with your trailer wiring.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Can 6-Way Be Added to Blue Ox Tow Bar Wiring Kit for Jeep Wrangler

Products Featured in This Question

Continue Researching