Crossover Truck Bed Toolbox for a 2006 Ford F-150 with Stepside Bed

Question

Question:

Will this tool box fit a 2006 ford f-150 flareside?

asked by: Leah B

0

Expert Reply:

The DeeZee toolbox to fit your 2006 Ford F-150 with the stepside bed is # DZ6170NB. To be certain the measurements of this toolbox are 69-3/4 inches long by 12 inches wide and 15-1/4 inches tall including the lid. Compare this to the space in the truck bed to determine fit. I have included a link to the installation details for you.

expert reply by: Michael H

0

click to enlarge

Answer 1

Take a look at the Dee Zee Toolbox, #DZ6170NB (silver) or DZ6170NB (black). These boxes are 69-3/4 inches long x 12 inches wide x 14-1/4 inches tall so they will fit in that 14 space between the wheel well and the front of the bed on your 2006 Dodge…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Kenneth, I'd be happy to help. The first thing to verify is that your 2026 Ram 2500 is a 4WD model equipped with a transfer case that has a neutral position, since those are the configurations that are generally approved for flat towing. If…

view full answer...

Answer 9

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Answer 10

Hi Fred! The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F24XV will indeed fit your 2025 Ram 2500 with the factory puck system. The only vehicles it won't fit are ones that have the factory…

view full answer...

Answer 11

Hey Joe, thanks for reaching out. I’m not aware of a specific factory paint code from B&W for touch-ups, but you can get it looking good again pretty easily. A can of flat or semi-gloss gray Rust-Oleum or a similar rust-preventative spray paint…

view full answer...

Answer 12

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…

view full answer...

Crossover Truck Bed Toolbox for a 2006 Ford F-150 with Stepside Bed

Product Page this Question was Asked From

Continue Researching