Replacement 60 Inch Long Axle with 49-1/2 Inch Spring Center for Boat Trailer

Updated 02/28/2022 | Published 02/25/2022

Products Featured in This Question

Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs

(399)

$225.84

Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs

(246)

$148.58

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

(634)

$14.17

Question:

Hello I need a trailer axle assembly for a boat trailer. The current trailer has a 60 hub to hub and a 49 1/2 center to center on leaf spring.

asked by: Isaac R

Expert Reply:

Assuming you are looking for a 2,200 lb axle you can use the Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs # e94YR. If you do not need the hubs then we also have the Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs # e43GR.

The spring seat measurement on both of these is 48" but there is a solution for that. You will need to cut off the spring seats and add the # TRSS175 to match your 49-1/2" measurement. Make sure this is performed by a certified welder.

expert reply by: Robin H