Flat Tow Setup For 2010 Honda CRV

Updated 02/23/2022 | Published 02/22/2022

Products Featured in This Question

Blue Ox Alpha 2 Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,500 lbs

(445)

$851.40

Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long

(204)

$63.73

etrailer Invisible Base Plate Kit - Removable Arms

(626)

$441.70

Brake Buddy Classic 3 Portable Flat Tow Brake System - Preset

(248)

$1263.94

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Straight Adapter Cord

(3145)

$183.07

Question:

I have a Honda CR-V 2010, I want to tow it with a Motorhome. What do I need? Base plate, tow bar? too many to chose from. what can you recommend?

asked by: Leo P

Expert Reply:

We have everything you need.

There are five major components to complete a flat-tow setup. You need a baseplate, tow bar/safety cables, braking system and high-low adapter.

First I recommend the etrailer Invisible Base Plate Kit - Removable Arms # e98956.

Next the Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500 lbs # BX7380. This model comes with safety cables.

Now lets go with the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494. This will keep you safe and legal.

To connect your electrical system I recommend the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. This will sync up your light functions between vehicles.

Last your probably going to need a Hi-Lo adapter. These keep your tow vehicle in line or level with your motorhome. If they are not level this will cause extra stress on the suspension systems and will eventually damage them.

To find out what size of drop you need park the vehicles in line on a flat surface. Measure from the ground up to the center of the hitch receiver opening on the motorhome. Next measure from the ground up to the center of the base plate arm/connector. These two measurements need to be within 3 inches of each other.

If they are not you will use an adapter like the Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long # C59KR.