Base Plates And Flat-Towing Equipment Needed For 2013 Honda CR-V  

According to Roadmaster, their #RM-521567-5 direct-connect base plates are compatible with your Falcon 5250 tow bar. Compared to the #RM-521567-4 which requires a crossbar, the #RM-521567-5 makes for a cleaner install that's easier to use. To…

There are some great options for baseplates for a Honda CR-V, but the Roadmaster Direct-Connect #RM-521448-5 is made specifically for use with a Jeep Wrangler. If you have a 2007-2011 CR-V, go with #RM-521559-5. If you have a 2012-2014, use…

The crossbar style of Roadmaster base plate kits like the part #RM-521567-4 do not actually come with a crossbar but instead attach to tow bars that have crossbars like the Roadmaster Falcon 2 part #RM-520. Or if you prefer not to use the crossbar…

For your 2013 Honda CR-V there are two options for base plate kits. Both of which would work with the Roadmaster Falcon tow bar part #RM-520 that you have already. The EZ4 part #RM-521567-4 is probably the set up that is the most similar to what you…

The Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521448-5 are a confirmed fit for your 2014 Jeep Wrangler Rubicon and should fit just fine with your Falcon 5250 tow bar. I reached out to my tech contact at Roadmaster and there are…

We do not have the height measurement from the ground for the attach points for the #RM-521567-5 base plates on your 2014 CR-V, but I have attached a photo that shows where the base plates attach points are on the vehicle. You can take a quick…

I have a solution for you, however, the Demco #DM9518320 baseplate kit you were checking out is only compatible with the 75th Anniversary or Rubicon Hard Rock Edition. The Roadmaster EZ5 Direct-Connect Base Plate Kit #RM-521448-5 is the most…

The base plate #3141-1 that you referenced does not fit a 2014 Honda CR-V so you'll need to start over with a new flat towing setup. For a base plate kit you'll want the part #RM-521567-5. In addition to the base plates, you will also need a…

Thanks for your picture, it helped out a lot. As long as your 2013 Honda CR-V doesn't have a brush guard the Roadmaster EZ5 Base Plate Kit #RM-521567-5 will the right base plate kit for you. It's important to note that safety chain anchor…

As you mentioned in your question, both the Roadmaster EZ4 #RM-521567-4 and EZ5 #RM-521567-5 Base Plate Kits are confirmed to fit your 2014 Honda CR-V. The primary difference between the two models is that the EZ5 does not use a quick-connect…

Looks like you have a round 4-way connector in the picture you submitted. The colors you mentioned aren't totally a match for standard colors but they are close. Normally the colors are: White - Ground Return Green - Right Turn and Brake Lights…

If you already have the EZ4 #RM-521567-4 or EZ5 #RM-521567-5 base plate kit installed on your 2014 Honda CR-V and you just need the arms then you simply need to fill out the form on the product page #RM-ARMS to get replacements. I have linked the…