Adapters For Connecting Blue Ox Tow Bar With Roadmaster Base Plate Kit

Question

Question:

HI, I HAVE A BLUE OX TOW BAR AVENTA LX TOW BAR, AND I ALSO HAVE A ROADMASTER BASE PLATE RECEIVER. I WOULD LIKE TO KNOW THE PROPER ADAPTER TO BE ABLE TO HOOK UP A BLUE OX WITH ROADMASTER BASE PLATE. THANKS

asked by: JUAN P

1

Helpful Expert Reply:

I have a couple options which will allow you to adapt your Blue Ox tow bars to fit a Roadmaster base plate. First the Tow Bar Adapter # RM62ZR will fit in place of the direct connect arms you got with your base plate. Another option is the Adapter Kit # RO64FR which will replace the ends on your tow bars.

expert reply by: Bud M

1

Roadmaster Base Plate Kit
(click to enlarge)

Blue Ox Tow Bar
(click to enlarge)

Answer 1

I've drawn up a diagram showing the dimensions of the Roadmaster Adapter Kit for Blue Ox Motorhome Mounted Tow Bars #RO64FR below. The pin holder portion of this adapter is 2-1/8" wide and 1-1/2" in diameter.

view full answer...

Answer 2

Here are the dimensions for the Roadmaster Adapter Kit for Blue Ox Motorhome Mounted Tow Bars, part #RO64FR. pin size = 3/4" pin length = 5" measurement from inside lip to the end of the pin = 4"

view full answer...

Answer 3

We have to recommend you stick with what the manufacturer recommends for flat towing your 2020 Jeep Grand Cherokee. Otherwise you run the very high risk of damaging the vehicle when flat towing it. Disconnecting the battery will reset your stereo…

view full answer...

Answer 4

The Roadmaster Direct-Connect Base Plate Kit #RM-524459-5 uses a 3/4" Pins #RM-910029 to secure to the crossbar. We do carry the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297 that will fit with the Universal Tow Bar…

view full answer...

Answer 5

Yes, I have a great part for you that will allow you to flat tow your 2020 Jeep Gladiator after you upgrade the bumper. I recommend the Blue Ox Aftermarket Off-Road Bumper Adapter item #BX88357. This adapter lets you use your motorhome-mounted Blue…

view full answer...

Answer 6

Yes, the fork ends of the Currie RockJock CE-9033TJ are designed to fit the Blue Ox Alpha 2 Non-Binding Tow Bar #BX7380.

view full answer...

Answer 7

In order to use your Falcon 5250 tow bar to flat tow your 2007 Honda Element you will need specific base plates, the Roadmaster Direct-Connect Base Plate Kit #1541-5. I am not 100 percent sure what you mean by "purchase the base plate which was…

view full answer...

Answer 8

I have included a link to a video on the 4-diode kit #RM-154 being installed on a 2014 Honda CR-V that will help. All you will need is access to the wiring behind the tail lights of the vehicle as if you were going to change a bulb. Its actually…

view full answer...

Answer 9

You are correct with the part you will need in order to convert your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates #RM-677 for use with your Roadmaster direct connect base plates, which are two of the swivel ears: -…

view full answer...

Answer 10

The Tow Bar Arms #RM62ZR will replace the arms on your Roadmaster Base Plate #RM-521453-4. This will allow you to tow your 2021 Jeep Gladiator with a set of Blue Ox Tow Bars #BX7420.

view full answer...

Answer 11

The etrailer Invisible Base Plate Kit part #e98948 is an excellent option for a 2019 Jeep Wrangler. The attachment methods can vary from manufacturer to manufacturer but each will be plenty suitable for flat-towing and I couldn't accurately say…

view full answer...

Answer 12

I do have an option but there are currently no Roadmaster base plate kits for a 2021 Jeep Wrangler per Roadmaster. Therefore, I must recommend the etrailer Invisible Base Plate Kit part #e98948 which is a better option because it replaces the ends on…

view full answer...

Adapters For Connecting Blue Ox Tow Bar With Roadmaster Base Plate Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching