How do I Turn on Lithium Mode on the Progressive Dynamics # PD4135K?
Updated 02/17/2022 | Published 02/16/2022
Question:
There was no paperwork or manual with the unit. Is there a manual or a video I can watch about it? My main question concerns the lithium mode. There is a tiny push switch below the f4 and f5 fuse spots, which is unlabeled. I assume this is the switch but how would I tell which mode it is set on? Any help would be appreciated. There is a sticker that says see manual for instructions on the front of the unit.
asked by: Brent S
Expert Reply:
I went ahead and reached out to my representative at Progressive Dynamics, and he confirmed that the lithium switch on the # PD4135K is located on the converter board below the heatsink. The Charge Wizard mode select button is on the fuse board. It allows you manually select the charge mode when operating as a lead acid charger. I went ahead and attached a diagram that shows both locations. The diagram also shows how you can tell when the lithium mode is set to "on" or "off."
(click to enlarge)
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: PD4560LICSV Converter and Power Control Center PD4560K18LS8
- Q&A: Troubleshooting A Progressive Dynamics # PD4560LICSV That's Putting Out 13.66v For A Lithium Battery
- Shop: Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel - 60 Amp
- Shop: Progressive Dynamics 4500 Series Inteli-Power Converter - 75 Amp
- Q&A: Where Is The Lithium Switch Located On The Progressive Dynamics 4000 Series PD4045KA
- Q&A: Can The Progressive Dynamics PD4135K Replace A WFCO WF-8725 Power Center
- Q&A: Can You Use Tandem Circuit Breakers In The Progressive Dynamics RV Power Center # PD4135K
- Q&A: WFCO 8735 Lithium Replacement
- Shop: MORryde RV Cargo Slide Tray - 60" x 33" - 1 Way Slide - 60 Percent Extension - 800 lbs
- Q&A: What is the Wizard Button for on the Progressive Dynamics RV Power Control Center