Does Draw-Tite Hitch DT97GR Fit 2022 Mitsubishi Eclipse Cross PHEV

Question

Question:

does the tow hitch fit a 2022 Mitsubishi Eclipse PHEV

asked by: John

0

Expert Reply:

It sure does! I checked with the manufacturer, Draw-Tite, and the Draw-Tite Max-Frame Trailer Hitch Receiver # DT97GR does fit all models of the 2022 Mitsubishi Eclipse Cross, including the PHEV.

I have added a link below to the installation instructions for you to check out as well of the Draw-Tite Max-Frame Trailer Hitch Receiver # DT97GR.

expert reply by: Kyle S

0

Answer 1

For a great 2" inch hitch for your 2022 Mitsubishi Eclipse Cross, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit #DT97GR. Apart from the easy, 40-minute installation, the Draw-Tite hitch comes with the highest tongue and…

view full answer...

Answer 2

For your 2022 Eclipse Cross Randy, you're going to need the following parts: Hitch #DT97GR Wiring #TK29VR 7-way connector #ETBC7 Brake controller #RED52VR The above hitch is currently (7/7/2024) the only hitch available for your vehicle. The…

view full answer...

Answer 3

As long as your Outlander isn't the plug in hybrid (PHEV), I'd recommend the #118482 for vehicles without the factory tow package or #118277 for vehicles with the tow package. If your vehicle has the tow package, it will have the tow package…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Does Draw-Tite Hitch DT97GR Fit 2022 Mitsubishi Eclipse Cross PHEV

Continue Researching