Aftermarket Hitch Options for 2010 Ford F150 With Bent OEM Hitch
Published 02/10/2022
Products Featured in This Question
Question:
My truck has a factory hitch that is not in good shape. It is bent and I really cant use the one that is currently on my truck. I need a replacement for the factory installed hitch. Would this one work or do you have any that would work?
asked by: Kevin P
Expert Reply:
I did some checking, and found that the hitch on your 2010 Ford F-150 is fully integrated into the bumper brackets so you can't just remove the existing OEM hitch and replace it with an aftermarket hitch like the Draw-Tite # 75691 you'd looked at. That's the bad news, but there are options.
• You can go to a salvage yard and find a 2009-2014 F-150 that wasn't equipped with the factory hitch, and get
the bumper and bumper brackets off of it and use those to replace what's existing on your truck. Once that's
done, you can install the # 75691 hitch.
• Your other option would be to leave the existing hitch in place, and install the TorkLift Hero Super Hitch, part #
TLF1005H. The Torklift hitch is specifically designed for trucks with the factory hitch.
The TorkLift hitch is an awesome piece of equipment, but it's pretty pricey. If it were my truck, I'd go with option # 1 if at all possible.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- For Towing
- Class IV
- 600 lbs TW
- 6000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Article: Which Hitches are Made in the USA
- Search Results: c55774
- Search Results: draw~tite trailer hitch
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Video: Best 2010 Ford F-150 Hitch Options
- Video: Hands-On with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
- Q&A: Availability of Hitch for 2013 Ford F-150 With Factory Installed Tow Hitch
- Q&A: Could Draw Tite Hitch # 75691 Fit 2010 Ford F-150 with Dual Exhaust
- Shop: Brake Controller
- Shop: Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Q&A: Is Draw-Tite Class III Hitch 75691 Concealed Behind Rear Bumper When Installed on 2010 Ford F-150
- Q&A: Recommended Trailer Hitch Receiver for 2010 Ford F-150
- Q&A: How To Upgrade the Factory Trailer Hitch On a 2010 Ford F-150
- Q&A: What Model Years of the F-150 Does the Draw-Tite Max-Frame Trailer Hitch Receiver Part # 75691 Fit
- Video: DIY 2011 Ford F-150 Installation for the Curt Trailer Hitch Receiver
- Video: In-Depth Review of the Hopkins Plug-In Simple Wiring Harness for Factory Tow Package
- Video: Setting up the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2010 Ford F-150
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Let’s Check Out the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Jeep Grand Cherokee C55774
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Front Mount Hitch
- Shop: Reese Replacement 7-Way RV-Style Trailer Connector for Factory Tow Package
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"