Correct Replacement Mounting Clamp for a Thule Hyper XL Cargo Box

Question

Question:

Hi, Is the correct part of. Hyper XL? TH7521484001

asked by: Jason G

0

Expert Reply:

The Replacement AcuTight Mounting Hardware with Screw part # TH7521484001 I confirmed with Thule is correct for a Thule Hyper XL Cargo Box.

expert reply by: Conner L

0

Answer 1

Thank you for the picture! So right off I can say that you will need to get more than 1 of the Replacement Cradle #TH8523387001. Since it's a different design than the other 3 I recommend picking up 2 of these and using them for the Quick Grip…

view full answer...

Answer 2

You will need the Replacement AcuTight Mounting Hardware #TH7521484001 for your Thule Sonic 634 as it came with the AcuTight Mounting System. The Replacement Quick Grip Mount Assembly #TH05738 is specific to the Thule Ascent, Atlantis, and Force…

view full answer...

Answer 3

Hey Rob, thanks for reaching out! The Quick Grip Mount Assembly #TH05738 has a screw in the middle on the underside (see attached photo) that you can try removing to see if that lets you get inside to fix anything. I haven't done this on my end…

view full answer...

Answer 4

The Quick Grip Mount #TH05738 and the AcuTight mount, #TH7521484001, both fit the same cradle, #TH8523387001, so you could use a Quick Grip in place of an AcuTight.

view full answer...

Answer 5

We can help you out with that, Anthony. We do indeed carry that part. You'd want the Thule replacement lock cylinder, part #THLOCKN019. You'll need the change key, part #853-1251 to remove the existing lock cylinder.

view full answer...

Answer 6

I contacted our representative at Thule and she verified that the Replacement Quick Grip Mount Assembly, part #TH05738, is the correct replacement hardware for your Thule Atlantis 2100 Roof Cargo Box. If you need cradles as well you would need the…

view full answer...

Answer 7

The flat side of the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware part #TH8523387001 will go against the bottom of the cargo box which you can see in the attached photo. Therefore, the screw hole will be facing down towards…

view full answer...

Answer 8

Hey Sheri, we used to carry the part number you mentioned and it was basically a 4 pack of the part #TH8523387001 that you also mentioned so yes the #TH8523387001 would fit and work great for you.

view full answer...

Answer 9

The replacement clamp for your Thule Hyper XL612 cargo box is the Replacement AcuTight Mounting Hardware with Screw Item #TH7521484001.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Correct Replacement Mounting Clamp for a Thule Hyper XL Cargo Box

Continue Researching