Is Curt Trailair Pin Box Compatible with Anderson Ultimate Hitch

Question

Question:

Can this king pin be used with the Anderson hitch?

asked by: GABRIEL L

1

Helpful Expert Reply:

Yes, the Andersen Ultimate hitch you have is compatible with the Curt Trailair pin box part # LC158778 that you referenced.

expert reply by: Jameson C

1

Answer 1

I checked with Andersen and they do state that their Ultimate 5th Wheel Connection can be used with the Trailair Rota-Flex 5th Wheel Pin Box like the part #LC328330 that you mentioned. As you referenced, you will just want to use the Rota-Flex…

view full answer...

Answer 2

In order to recommend the correct Trailair replacement pin box for your Keystone Challenge 5th wheel, I will need to know the manufacturer and model number of your OE pin box. This information should be listed on a plate or sticker affixed to the pin…

view full answer...

Answer 3

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3200 should only be used with fixed pin boxes. Since the Curt Air Ride #LC158778 moves from the air ride it should not be used.

view full answer...

Answer 4

Hello again Joel; I would recommend the Curt Air Ride 5th Wheel Pin Box #LC158778 over the Flex Air #LC369535. The pivoting head from the Flex Air causes too much movement so it actually isn't compatible with the Andersen hitch. Since the Air…

view full answer...

Answer 5

The Trailair Flex Air #LC328492 is the correct replacement for your Lippert 1621 and we've confirmed will work with the Andersen Ultimate. The Flex Air is going to be the best option to smooth out your ride.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Is Curt Trailair Pin Box Compatible with Anderson Ultimate Hitch

Product Page this Question was Asked From

Continue Researching