Harness Needed To Install Curt Trailer Brake Controller On 2021 Nissan Frontier w/ Tow Package

Question

Question:

I have a 2021 frontier and a Curt 51120 discovery brake box. I am needing the cable that goes from this to the truck. Will the curt 51382 not work for this. The white factory plug that plugs into the truck looks the same for this as it does on the plugs intended for the 2021 model. Any help would be appreciated.

asked by: Jason

0

Expert Reply:

In order to install the Curt Discovery part # C84VV on a 2021 Nissan Frontier with factory tow package you'll simply need the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51382.

expert reply by: Conner L

0

Answer 1

Hey Edward, unfortunately mounting hardware is not included with the Pack'Em Trimmer Rack for Utility Trailers #PK-6S but you should be able to get that at any local hardware store. The grade 8 bolts, nuts, and washers is what I'd get, a lock…

view full answer...

Answer 2

You'd have to install the other PackEm Trimmer Rack - Open Utility Trailers - 1 Trimmer Item #PK-6S on the other side of your trailer but once installed you'd be able to carry two trimmers.

view full answer...

Answer 3

The Pack'Em Trimmer Rack part #PK-6S installs directly on the trailer's side rail (see photo 1). The Pack'Em Expansion Pack part #PK-OP1 installs on a set of uprights like the Pack'EmTower Kit for Pack'Em Racks part #PK-BM (see…

view full answer...

Answer 4

With the Pack'Em Single Trimmer Rack #PK-6S I would recommend having the motor of the trimmer facing the front of the trailer. The motor side mount fully latches around the trimmer whereas the other side requires you to angle the trimmer in to…

view full answer...

Answer 5

In your 2017 Nissan Frontier, the Curt brake controller should be installed using the custom wiring adapter #C51382. This should work correctly to give you the proper wiring within your cab. Then you will use the Curt #C56226 or the Tekonsha #118266…

view full answer...

Answer 6

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Hey John, thanks for reaching out! If the 4-Way on your 1996 Ford F-150 is from the factory then the only wire splicing you'll need to do is with the Adapter #37185, which plugs into your 4-Way and then you'll connect the rest of the wires to…

view full answer...

Answer 12

Hey Charles, yes we do have the Curt trailer wiring harness part #C98RV that is a confirmed fit for your 2024 Hyundai Santa Fe.

view full answer...

Harness Needed To Install Curt Trailer Brake Controller On 2021 Nissan Frontier w/ Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching