What Suspension Enhancement do You Recommend for Extending the Life of My 2022 F-250 Leaf Springs?

Question

Question:

what suspension system do you recommend for extending the life of my leaf springs on my 2022 ford F-250 4x4?

asked by: Doug M

0

Expert Reply:

I have just the thing for you. For extending the life of your leaf springs on your 2022 Ford F-250 4x4, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-SHD (3k) or the # RAS3611-S (2k). Both of these kits provide your leaf springs with the extra support you need to prevent sway/body roll as well as sag. Also, in addition to prolonging the overall life of your factory leaf springs, these kits do not require any maintenance once installed on your truck.

For ultimate results, you cannot go wrong with the HD version # RAS3611-SHD. The increased capacity will give you extra firmness as well.

expert reply by: Bob C

0

Answer 1

The RoadActive Suspension Custom Leaf Spring Enhancement Kit like part #RAS3611-Y for your 2018 Ford F-150 only works when enough weight is placed on the vehicle's rear suspension for the leaf springs to flex. If you are using a weight…

view full answer...

Answer 2

The RoadActive Suspension Custom Leaf Spring Enhancement Kit part #RAS4611 will work well with the weight distribution hitch. If you are experiencing vehicle sag, I recommend to first make sure the tongue weight of the trailer is 10-15% of the loaded…

view full answer...

Answer 3

For your 2022 Ford F-250 the best suspension enhancement is the RoadActive Suspension kit part #RAS3611-SHD which is easy to install, is adjustable in support, improves handling and stability, and unlike other options actually improves ride quality…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What Suspension Enhancement do You Recommend for Extending the Life of My 2022 F-250 Leaf Springs?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching