bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Leaf Springs and Helper Springs
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Light Duty
THIS ITEM IS NOT A FIT FOR
1984 Ford Van
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SuperSprings Intl

SuperSprings Custom Suspension Stabilizer and Sway Control Kit

In Stock
$534.99
Retail:$659.99
You Save: $125.00
Vehicle Suspension
Not Confirmed to Fit

1984 Ford Van

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
1,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your Ford Van's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Great Prices for the best vehicle suspension from SuperSprings Intl. SuperSprings Custom Suspension Stabilizer and Sway Control Kit part number SS94VR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (305)
  • Q & A (0)
  • Photos

Ford Van - SuperSprings Custom Suspension Stabilizer and Sway Control Kit

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 1,400-lb Load Support: Keeps your truck level and prevents sagging when towing or hauling heavy gear.
  • Stable, Safer Handling: Cuts sway by up to 30% for steadier steering in wind or around curves.
  • Zero Maintenance Needed: No air lines or pressure checks—automatically adjusts to your load.
  • Simple Bolt-On Setup: Installs above factory springs with no drilling for a quick DIY upgrade.
  • Custom Ride Options: Choose shackle settings to fine-tune support, ride height, and comfort.
Made in USA

Features to know about

Keep the Truck Level Under Heavy Loads: 1,400-lb Rear Suspension Support

When towing or hauling heavy gear, sagging suspension can make steering sloppy and braking unpredictable. The SuperSprings Custom Suspension Stabilizer and Sway Control Kit adds 1,400 lbs of rear suspension support by bolting directly above your factory leaf springs. These helper springs engage automatically when your rear suspension flexes, lifting and leveling your truck to prevent bottoming out while keeping the ride steady under load.

Comparison image showing vehicle suspension before and after installing SuperSprings helper leaf springs, highlighting improved leveling and reduced rear sag.

Reduce Body Roll and Sway: Helper Springs That Stabilize Handling

Crosswinds, passing semis, and uneven corners can throw a loaded truck off balance. These SuperSprings act like sway bars to keep body roll in check—reducing sway by up to 30 percent. As your factory springs flex, rollers on each end of the helper spring react to stabilize the suspension, so you stay in control even when the road or wind tries to push you around.

Adjust for the Way You Haul: Customizable Shackle Settings

No two loads are the same, and these helper springs let you dial in exactly how much support you want. The shackles include multiple bolt-hole positions so you can set them up for constant heavy loads, maintain factory ride height, or find a balanced setting that gives you extra support without stiffening the unloaded ride.

Install Once, Forget About It: Maintenance-Free Suspension Upgrade

Unlike air systems that need constant pressure checks or hose maintenance, these helper leaf springs do their job automatically with no air lines or adjustments to worry about. The bolt-on design installs easily with no drilling required, and dense polyurethane pads seat between the springs to prevent shifting. Built from SAE5160H high-grade shot-peened steel, they deliver reliable performance that extends the life of your brakes, tires, and factory suspension over time.

Installed SuperSprings helper leaf spring mounted above a factory suspension leaf spring on a vehicle’s rear axle, demonstrating easy bolt-on installation.

Specs

Weight and Capacity

  • Weight capacity: 1,400 lbs

Diagram of SuperSprings suspension system showing roller and shackle assembly that mounts above factory leaf springs to provide load support and sway control.

Warranty

  • Limited lifetime warranty
  • 30-Day satisfaction guarantee

SSA40 Super Springs Leaf Spring Suspension Enhancer - Anti Sway

Item # SS94VR

Installation Details SS94VR Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.6

305 reviews
Review sort icon
1,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

by:

Unbelievable! Why didn’t I do this sooner? I’ve never seen daylight between my tires. Gaines two inches and rides soooo much better.



by:

E-trailer agent James helped find trailer tow package that fit my 2011 Ford Transit Connect and provided appropriate install video. You're a huge help James. The install went smoothly without a hitch (lol).



by:

2013 Toyota Tundra 4x4. Installation went well in my garage with a medium sized C-Clamp. The ride feels that same as stock. Lifted the rear 1.5" which helped off set the 2.5" lift in the front from Fox 2.0 shocks. I have not hauled a load yet.



by:

Product worked as described. Shipping was quick (etrailer used "air" to my state, then on UPS truck)
Easy to install, not sure why they included 2 sets of polyurethane blocks (only one set fit my truck)
Don't notice any ride difference when set at lowest setting. Raised truck approximately 3/4". East to readjust for more preload if needed.
Combined these Super Springs with Timbren load handlers. So far so good.
Great improvement over stock while maintaining ride quality.



by:

Installing these on a 2020 F250 was easier than I thought it would be. I was able to get the springs on whit the center piece and the front shackle bolted without jacking up the truck. I had to jack the frame up a few inches on each side to get the back shackle bolt through. I put the shackle bolts through the bottom holes since I only need the extra support when I tow. I recommend air / power tools for the shackle nuts and it doesn’t hurt using them for the center bracket u bolts. They are lock nuts and they have a long way to run on for each bolt. I did have to bend my parking brake cable hangar out a bit for one of the shackle bolts to clear the cable. The truck seems to sit a little higher in the back. Maybe an inch or so. The ride empty seemed the same except it felt like it didn’t roll quite as much when turning. Rolling over a lip at the end of our driveway the extra stiffness was noticeable, however. I won’t know how well they really work until I get my fifth wheel hooked up.



by:

Couldn’t install on my Class C due to the placement of a propane line from the manufacturer. I was very pleased with the weight and solid construction.



by:

Easy to install and they definately keep my pick up from squatting as much with our trailer hooked up.



by:

This was by far the easiest mod I have made to my 2019 Ford Super Duty King Ranch! Only took 45 minutes start to finish. Didn't even take the wheels off. Took some pressure off of the springs by lifting the rear end a little using the trailer hitch. Used the bottom holes on both ends and only raised the rear of the body 1 inch. Great product!



by:

You should inform customers about special tools needed to preform install. Not on easy install as stated in video



by:

I installed the springs in a little over an hour but have yet to put our 15,500 lb 5th wheel RV on the truck. The pin weight is around 2,800 lbs when she is fully loaded, so we will see if these help us with the sway and porposing, also the side weight when starting into a curve.



by:

No issues with install on a 2023, E350 Class C motorhome.
After chalking the front wheels, I used two 3 ton floor jacks with 13” 6x6 blocks just behind the springs to lift the frame and rear tires off the ground to remove the wheels. For safety, 3 ton jack stands were put under the axles during spring installation
After installing the springs per manufacturer instructions, two 1/2” x 10” pieces of all thread with drilled flat bar were used to compress the front end spring.
With the least amount of preload it raised the back a good inch.
The 800# trailer tongue weight will be the next test to see if more preload is needed for a level ride height.



by:

These leaf springs works great !! More stable my van but I would like that it brings up an inch !!! Great buy



by:

Installed on a 2016 Toyota Tundra. I pull a 28 foot aluminum frame utility trailer. Hauls like a 3/4 ton with super spring. Rides like 1/2 ton without load. I have put 1 ton load on truck with no trailer and the truck drove fine. The front of truck at tires rose 1/2 inch. Installation requires the frame to be lifted off the axel.at rear of vehicle. I like this system better than air shocks as there is no adjustment after installation. I would purchase again.



by:

I have the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers - 2" Hitches on my 2025 Airstream Interstate. They were causing the van to sag. The Springs went on Fairley easy and provided the lift I needed.



by:

I bought these as part of my suspension modifications . I had them installed on my Ford F350 SB . I have an Arctic Fox 865 truck camper. It’s a heavy camper so to minimize sag and sway I installed Timbren bump stops, a hellwig bigwig sway bar,Torque lift stable loads. That improved things quite a bit. I installed these super springs last ,they further improved sway and improved the overall stability and ride quality.
I definitely feel these were worth purchasing. I could not decompress the existing leaf springs enough to install these myself so had them professionally installed.
I would recommend them for hauling a truck camper.



by:

Added these to my Mercedes air stream 19x class b van that already has 2 leaf springs. Had swaying issues at 60MPH and up. These put a stop to it right away and kept from sagging in the rear when loaded up with all our gear and water tank full. I have them on the mid setting. My van is 4wd and already lifted so didn’t raise it more than 1/2in. Still has a smooth ride and no big jolts like air bags or sumo springs.
I bought these a year ago so not sure if anything has changed Bad thing is they are slightly too long, Just enough to touch the wheel well and rub the under coating off. If you’re going to install yourself, I found a good you tube install. The U-bolts for install are too short. Need 2 forged C-clamps.
These are a 100% buy, don’t mess with air bags or sumos. These adjust themselves with load or no load.



by:

Without towing, the truck seems to ride a little smoother. The real test will come when I hook up my fifth wheel. Very simple to install.



by:

This product did exactly what I needed. Lift the RV up to unloaded height. I have not exceeded the 12500 GCWR but the rear end was dragging like it was severely overloaded. It was a very tight fit because the mud flap framing and gas lines were almost in the way. An entire day later with a couple of clamps and sore wrists at max setting fixed the sag perfectly! I wish I had before and after pictures. I can almost fit my head in the wheel where I could not get my arm in before.



by:

Fast delivery, free shipping, the springs went on pretty easy, had some problems with install due to my vehicles configuration, Travato59K,not the springs. This was a 2024 RAM Promaster3500, raised it up 1.75” on the lower setting. Noticeable help with sway problem.



by:

The shackles on each end were too narrow to clear the spring clips so locating them was harder than need be. The instructions had a mistake, locating the front shackle incorrectly. Installed as they are. Improved ride a lot. Glad I got them.



by:

Exactly what I needed and what I wanted very fast shipping thanks E trailer



by:

While use the middle setting it only gave it a slight lift with a minimal unloaded bounce. Usually never overload the trucks maximum capacity but needed to for a short distance and with approximately 1300 pounds in the bed, the truck didn't squat at all.



by:

This was a great addition to the suspension of my 2021 Ford E350 Class C RV. The rear springs were at almost max load. This raised the chassis at the rear axle almost 2-inches. This is a heavy duty spring and I had to fabricate a tool to compress the spring.



by:

Fit great on my 2025 Ram. I makes a big difference pull my 14000lb 5th wheel. Highly recommend these for any heavy loads. I have put these on 3 other trucks and they are maintenance free. You don't need to worry about the load you are hauling.



by:

Excited to install have purchased item before for my other vehicle


25
25

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Recommended Leaf Spring Enhancement For A 2019 Ford F-450 Cab & Chassis
    Hey Tim, We have a few options based on whether your F-450 is 2WD or 4WD: 2WD SS # SS94VR - 1,400lb capacity SS # SSA22 - 2,500lb capacity SS # SSA17 - 5,000lb capacity 4WD SS # SSA25 - 3,400lb capacity SS # SSA26 - 6,800lb capacity I always recommend sticking around the weight of the load without going too much over it when it comes to suspension enhancement so I'd go with the # SSA17 if you have 2WD or the # SSA25 if you have 4WD.
    view full answer...
  • Suspension Enhancement for a 2024 East to West Entrada 29500 Motorhome Towing a Car Hauler
    Hey Richard, To give your motorhome some extra help I recommend going with the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SS94VR because it's maintenance-free and is only active when you need it. This is similar to the Timbren kit you were looking at, but the Timbrens have been known to make the ride quality a bit stiffer even unloaded. The SuperSprings kit will give you the support you need without compromising your ride quality. I will also add that if the angle...
    view full answer...
  • Can 2017 Ford F-250 Have SuperSpring and SumoSpring Installed at Same Time
    Hey Jay, the SuperSprings kit part # SS94VR that you referenced will fit your 2017 Ford F-250 that has the SumoSprings Rebel part # SSR-128-47-2 installed already. The two kits would not interfere with each other.
    view full answer...
  • SuperSprings For a 2023 Ford F-250 Built After January 1st
    For your 2023 Ford F-250 built after the 1st of the year you have a few different option SuperSprings. You will want to select the correct system based on the amount of weight you intend to carry. 1,400LB # SS94VR 2,500LB # SSA22 3,400LB # SSA25 The 3,400lb kit is recommended for applications which constantly carry heavy loads such as trucks with contractor beds installed.
    view full answer...
  • Will SuperSprings Fit 2013 Ford F-250 or F-350 Without Factory Overload Springs
    I checked with the manufacturer, SuperSprings, for you and each of the SuperSprings kits will fit your 2013 Ford F-250 or F-350 Super Duty that does not have factory overload springs. These are an excellent upgrade to your suspension because they have so many benefits; the SuperSprings will help level out your truck, reduce sway, and give you better handling with the support it adds to your rear suspension. The only thing you'll need to do is pick the correct option for your application...
    view full answer...
  • SuperSprings SumoSprings For a 1997 Ford E-350 Cutaway Van Chassis
    SuperSprings offers their SumoSprings in either the 500LB # SSF-106-40 or 1,000LB # SSF-106-47 for the front of your 1997 Ford E-350 cutaway chassis. While they do not have a SumoSpring for the rear the suspension they do have their Stabilizer and Sway Control Kit in either a 1,400LB # SS94VR or 2,500LB # SSA22 kit. While these do not offer the progressive cushioning like the SumoSprings they do greatly increase stability and will help to reduce rear sway. I recommend using the heavier...
    view full answer...
  • SumoSprings Kits that Fit 2023 Entegra Odyssey 24 B
    Yes you can add the yellow SumoSprings kits for your 2023 Entegra Odyssey 24 B with the part # SSF-111-60 for the front and the part # SS94VR for the rear. The rear set is a leaf spring style as there isn't a jounce spring option available at this time.
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Daron K
Edited by:
Daron K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Alex H
Written by:
Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924