Replacement Cap for Valterra Sewer Hose Carrier

Question

Question:

No brand on the actual tube but here is a picture of the other side with the original cap.

asked by: Horacio L

1

Helpful Expert Reply:

Is there any brand info on the hose that you can see?

expert reply by: Jameson C

1

Sewer End Cap Valterra
(click to enlarge)

Horacio L.

1/7/2022

No brand on the actual tube but here is a picture of the other side with the original cap.

Jameson C.

1/7/2022

Thanks for the picture, based on that I can tell it's a Valterra and the correct replacement is # VA82VR.

Answer 1

Hi Melinda, Thanks for your question. Unfortunately, there's no reliable way for me to identify the sewer hose carrier on your camper based on the make and model. The Replacement End Cap #VA82VR is designed specifically for the Valterra EZ Sewer…

view full answer...

Answer 2

Valterra makes two different replacement caps for their sewer hose carriers. The #A04-0161BK is for carriers manufactured before November of 2019. If your carrier was manufactured after that time (which is likely given the 2021 model year of your…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Replacement Cap for Valterra Sewer Hose Carrier

Product Page this Question was Asked From

Continue Researching