How To Install Brake Controller In a 2010 Chevy Suburban

Question

Question:

I have a Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional Item # 90885 that is currently in use on one of my vehicles. I would also like to use it on my 2010 Suburban with towing package. I need a pigtail. Can you please tell me which one I need? Thanks.

asked by: Luis A

0

Expert Reply:

The 2010 Suburban doesn't have a brake controller connector under the dash, but there are bare ended tow package wires that your # 90885 will connect to. All you'll need is the # 7894 wiring pigtail.

The tow package wiring is located near the top of the e-brake pedal, the harness has a white tag on it which will make it easier to identify. The pigtail wires to the tow package wiring as follows:

- Tow package red/black striped wire connects to black pigtail wire
- Tow package light blue wire connects to red pigtail wire
- Tow package dark blue wire connects to blue pigtail wire
- Tow package white wire connects to white pigtail wire

I've linked to an installation video that you might find helpful.

expert reply by: Mike L

0

Answer 1

Chevrolet had a plug-in port for a brake controller harness for trucks and full-size SUVs, but they stopped doing that after 2006. There should be a bundle of wires tucked up underneath the dash held together with a tag. The tag lists the functions…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

How To Install Brake Controller In a 2010 Chevy Suburban

Featured Help Information

Miscellaneous Media

Continue Researching