Why Is There Slop In My Trailer Coupler When Mounted To the 2-5/16" Hitch Ball?
Updated 12/20/2021 | Published 12/19/2021
Question:
I pulled my trailer empty and the locking latch and my ball have damage. Attacted photos. Are there any adjustments needed. I have the right size ball and it looks like there was to much slop between the ball and coupler.
asked by: Dan S
Helpful Expert Reply:
If you have a lot of excess slop in your coupler then you will likely need to replace the coupler latch. A coupler latch like the one in the Repair Kit for Titan Couplers # T1848700 will wear down over time and will need replaced when it wears down.
If you can identify what coupler you have I can help you find the correct repair kit for your Coupler.
The White Grease Hitch Ball Lube # 58117 will help to prevent the coupler latch from wearing down as quickly and also reduce some of the hitch noise you likely experience while towing.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Repair Kit for Dexter Couplers and Trailer Brake Actuators - 2-5/16" Ball
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Coupler Repair
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: noco ac port
- Search Results: weighsafe
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range C
- Video: Detailed Breakdown of the etrailer E Track Wheel Tie Down Straps w/ Roller Idlers
- Shop: NOCO AC Port Plug with Extension Cord - 6' Long
- Shop: NOCO AC Port Plug with Extension Cord - 12' Long
- Q&A: How To Couple and Uncouple a Bulldog Style Trailer Coupler
- Shop: etrailer E Track Wheel Tie Down Straps w/ Roller Idlers - 2" x 12' - 1,100 lbs - Qty 2
- Shop: Weigh Safe Universal 2" to 2-5/16" Stainless Steel Clamshell Hitch Adapter
- Shop: Replacement 2-5/16" Hitch Ball for Weigh Safe Ball Mounts - Stainless Steel - 10,000 lbs
- Video: Complete Breakdown of the Lippert OneControl Insight Camera LCD Display Kit
- Search Results: demco
- Shop: Base Plate for Tow Bar
- Shop: Suspension Enhancement
- Search Results: proven locks
- Search Results: torsion
- Search Results: bulletproof hitches
- Shop: Trailer Hitch
- Q&A: Should 1 or 2 Bar-Style Friction Sway Control Units be Used on a 7,000 Pound Trailer
- Q&A: Recommended High-Capacity Silver-Painted or Zinc Plated A-Frame Trailer Coupler
- Q&A: Demco Coupler Dimensions For 50-Degree A-Frame Trailer For Fabricated Frame
- Q&A: Trailer Hitch Extension For Truck Towing A Trailer and Truck Bed Camper
- Q&A: Recommendation for Adding 2nd Friction Sway Control Bar to Trailer
- Search Results: trailer sway control
- Q&A: How to Add a Center Mounted Third Brake Light to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Accessories and Parts
