Weight Distribution Recommendation for 2000 lb Travel Trailer

Updated 12/14/2021 | Published 12/13/2021

Products Featured in This Question

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW

(866)

$746.12

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2634)

$24.72

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3932)

$20.94

Thin Walled Socket for Equal-i-zer Hitches

(102)

$74.06

Question:

Hi there. I have a 2021 NoBo 10.6 travel trailer 2000 lbs that I tow with a 2007 4runner or 2021 Tacoma. On both vehicles, even though it is a light trailer, there is still a bit of sag in the rear-especially the 4runner, even though it has a new suspension setup that includes bilstien 5100’s which I love. Because I don’t want to change suspension, is a weight distribution hitch recommended? If so, which do you recommend? I really appreciate the help. I’ve asked around but just want some real expert advice.

asked by: Monty

Expert Reply:

I'd be happy to help with that.

A weight distribution system would be a great choice for eliminating the rear suspension squat you're experiencing when your travel trailer is hitched up.

You'll choose the system based on the tongue weight of the travel trailer when it's fully loaded and ready to tow. If the 2000 lb figure represents the weight of the fully loaded trailer, the tongue weight would be about 300 lbs, give or take a few lbs.

Because travel trailers are very susceptible to trailer sway caused by crosswinds and turbulence from passing traffic, I would urge you go choose a weight distribution system that includes an integrated sway control component. I'd recommend the Fastway e2, part # FA92-00-0600 which is effective on trailers with tongue weights between 200 and 600 lbs. The weight distribution will even out your ride height, eliminating the sag and will also combat trailer sway, which will make towing your small toy hauler a much more enjoyable experience.

You'll also need a trailer ball, use # A-90 for a 2 inch ball or # 19286 for a 2-5/16 inch ball. You'll also need a 1-7/8 inch thin walled socket to install the trailer ball, we offer them as part # EQ70-00-4800.

I've linked to a video showing the system being installed and set up.