What are Bins of Lippert Underchassis Double Bin Storage Unit for RVs # LC175180 Made Of

Question

Question:

What type of plastic is used for under chassis storage compartments for RVs. I have done a exhaustive search with no luck. etrailer has always helped.

asked by: Randall R

0

Expert Reply:

I checked with Lippert and they informed me that the bins of the # LC175180 are made of linear low-density polyethylene.

expert reply by: Jameson C

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hi Mike, what exactly are you looking for? You looked at a weight distribution hitch (WDH), are you trying to find the right one for your setup? If you are, can you tell me more about your trailer? To find the right WDH it is important to know the…

view full answer...

Answer 5

Since your 2020 Ford Ranger SXT came with a factory installed 7-way trailer connector, you should have a brake controller connector under the dash. That being said, the connector that would most likely fit #3034-P, has not been confirmed as a fit for…

view full answer...

Answer 6

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Answer 7

Hello Gary, thanks for providing all of the info and part numbers for your awning. That does come back as one of the Lippert 2000 series awnings. It sounds like you might be looking for the Replacement Pitch Arm Assembly #LC93BX which is for the 2000…

view full answer...

Answer 8

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 9

We do have what you need in order to install a roof rack on the camper shell of your Toyota Tacoma with a 5 foot bed, and you'll need to start with a track system. Since you have a short bed (and therefore shell), I recommend going with 50 inch…

view full answer...

What are Bins of Lippert Underchassis Double Bin Storage Unit for RVs # LC175180 Made Of

Product Page this Question was Asked From

Continue Researching