What Size Are the Bolts That Come With The Curt Trailer Hitch Receiver # C89UR For a 2021 Venza?

Question

Question:

Are the bolts on the Curt venza hitch metric?

asked by: Kenneth P

1

Helpful Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C89UR does use M12-1.25 x 35mm metric bolts for attaching the receiver to the frame on your 2021 Toyota Venza. These bolts thread into the factory weld nuts that are already in the frame of your Venza. Also Included with the hitch are four 1/2" conical tooth washers.

expert reply by: Bud M

1

Roger M.

6/15/2026

Hello, my name is Roger. I just bought a receiver for my 2021 Visa, but no bolts came with it. I desperately need four bolts with the special washes with the teeth on them. The right side is a little tight as far as room so I don’t know if the 35 mm bolt will go in there. I guess you know about that. I need the kit the four bolts with the special washes cause I wanna put my receiver on so bad appreciate it if you could let me know if you have a kit for sale thank you. Roger

Jerred H.

6/15/2026

@RogerM Hey Roger. The only way I have to get you the bolts you need to install the Curt item # C89UR hitch is with the Replacement Hardware Kit item # RHK. You will want to go to the item # RHK product page and on the right hand side where it says Hitch Item Number you'll need to insert C89UR.

Answer 1

To add a trailer hitch to your Hybrid 2023 Toyota Venza, I recommend the Curt Trailer Hitch item #C89UR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver #C89UR for your 2021 Toyota Venza weighs only 28lbs. While it is light enough for one person to maneuver a 2nd set of hands is very helpful in lining up the receiver during installation. I have linked and installation…

view full answer...

Answer 3

For your 2021 Toyota Venza, I recommend the Curt Trailer Hitch #C89UR. For a bike rack, you will need a rack that fits a 2 inch hitch. I recommend the Thule Doubletrack Platform-Style #TH990XT because it is a top-of-the-line brand that includes a…

view full answer...

Answer 4

Hey Mike, Yes, both the etrailer #e25AR and Curt #C89UR are compatible with hybrid models of the 2023 Toyota Venza and you would be able remove your 1.25" hitch in order to install one of these. Personally, I prefer the matte black finish of the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

What Size Are the Bolts That Come With The Curt Trailer Hitch Receiver # C89UR For a 2021 Venza?

Featured Help Information

Miscellaneous Media

Continue Researching