What Axle Lift Kit Would I Need For A Lippert Torsion Axle Rated At 3,500 Lbs

Question

Question:

What is the correct riser and do you recommend or advis not to add a riser kit?

asked by: Neil A

0

Expert Reply:

The axle on your 2018 Forest River R-Pod Travel Trailer is Lippert torsion axle rated at 3,500 lbs. The Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift, part # LC382741, is the lift kit you need. It will provide you with 3-1/2" of lift.

I have included a product description link and a video demo link below.

expert reply by: Mark Smith

0

Answer 1

I have a solution for you that's fairly easy to give you some lift on your trailer, but you will need to first determine the diameter of your axle and whether or not your springs are mounted under the axle. As long as the springs are mounted…

view full answer...

Answer 2

Lift kits aren't specific to any trailer, they are specific to axles, and based on my research it looks like your 2019 Flagstaff E-Pro uses torsion axles. I wasn't able to determine what axles they were specifically but your trailer has a…

view full answer...

Answer 3

If you have a standard leaf spring axle and the leaf springs are mounted below the axle you could use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 (for 2-3/8" diameter axles) or part #K71-385-00 (for 3" diameter axles).…

view full answer...

Answer 4

Hey Joe! I don't have a database that will show me what axle you have on your 2020 Forest River Flagstaff e-pro 19bh or the specifications needed to recommend the correct replacement. If you could email me a picture of the axle tag I would be…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 11

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 12

Hey Blake, thanks for reaching out. We should definitely have an electric jack for you, but I don't have a way to look up your camper online to know exactly which one will fit. RV manufacturers just aren't that specific with their online…

view full answer...

What Axle Lift Kit Would I Need For A Lippert Torsion Axle Rated At 3,500 Lbs

Featured Help Information

Miscellaneous Media

Continue Researching