Size/Type Hardware for Installation of Deluxe Window Frame for RV Entry Doors

Question

Question:

I recently bought a replacement RV door window frame from you company. I went to install the new frame and found could not find the hardware instructions or screws. I was wondering if you could tell me what size, type and length of crew I should, use to install the window frame? Code 37211021

asked by: Stephen T

1

Helpful Expert Reply:

The Deluxe Window Frame for RV Entry Doors, # 37211021, uses #6 flat head x 1-1/2" long screws for installation.

expert reply by: Michael R

1

Answer 1

Hey Frank, unfortunately the Dometic FanTastic Roof Vent Assembly Upgrade Kit #FV807357 is not going to work with your Fan-Tastic Fan 1450 because the lift arm is different. Your only option then is to replace the entire assembly with a brand new one…

view full answer...

Answer 2

We do have some replacement heating pads for your Thomas Payne recliner's. Depending on what series you have, we may have a solution for you. If you have the Thomas Payne Theater seating, #LC38UD will work for you. If you have the Seismic Series…

view full answer...

Answer 3

You will have to go from the side or underneath. Then you can unplug and remove the old pad and replace it with the Replacement 29-Volt Seat Heating Pad for Thomas Payne Seismic Series RV Couches and Chairs #674864. If you need to replace the entire…

view full answer...

Answer 4

Thanks for reaching back out! It looks like the Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans #FVK8017-00 will actually work with the FV7300 model as well so it's exactly what you're needing! We've confirmed this…

view full answer...

Answer 5

There are 15-3/4" by 25" RV window door frames with glass, but they do each come with frosted glass, the Valterra Entry Door Window Frame Assembly - Black #A77051, and Lippert Components Replacement Window Frame with Seal for RV Entry Doors…

view full answer...

Answer 6

Hey Arthur, Sorry to hear about that, and we can replace your ST235/80R16 tires and for ones that are high-quality I recommend going with Westlake. You just need to know the load rating you need, and I'll list out the options for you. - Load…

view full answer...

Answer 7

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Size/Type Hardware for Installation of Deluxe Window Frame for RV Entry Doors

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching