Is the Bracket for the Rear Hub Cover Bolt on 2007 Winnebago Tour 40TD Motorhome

Question

Question:

I have a 2007 Winnebago tour 40td class A motorhome it is on a freightliner chassis. I need the bracket for the rear hub cover bolt where it screws into. Mine is stripped. RH thread. The bracket is shown to come with your hub covers. Can you get me just the bracket?

asked by: Robert R

1

Helpful Expert Reply:

I spoke to my contact at Phoenix USA and he told me the correct part for your 2007 Winnebago Tour 40TD Motorhome is the Replacement Right Thread Mounting Bracket for Phoenix USA Wheel Center Caps for 8-1/4" Axles # PHX67FR.

expert reply by: Thomas M

1

Robert R.

11/12/2021

How do I order that part?

Reply

Les D.

11/16/2021

Just go to the product page I have linked below and add that item to your cart. If you prefer a more personal touch you can call our Customer Service Team at 1-800-298-1624.

Reply

Answer 1

You will need either the Phoenix USA Rear Wheel Center Cap Right Hand Thread #PXQ2010XL or Left Hand Thread #PXQ2010L if you have a 6-1/2" wide hub. Otherwise you will need the Right Hand Thread #PXQ2020 or Left Hand Thread #PXQ2020L if you have…

view full answer...

Answer 2

For a right hand thread you'll need part #PXQ2020XL and for a left hand thread you'll need part #PXQ2020L. Both of these are designed for 8-1/4" hub diameters and a 10 lug pattern.

view full answer...

Answer 3

Manufacturers do not list the parts they use on their RV's so you'll need to measure the bolt pattern and hub size of your current setup to determine the compatibility of the Phoenix USA Rear Wheel Center Cap #PXQ2020XL. The #PXQ2020XL fits a…

view full answer...

Answer 4

It definitely sounds like you are needing something like Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Right Thread #PXQ2020XL. Just a few things to check to confirm fitment, this fits 10 lug on 285mm pattern and…

view full answer...

Answer 5

The Phoenix USA Wheel Center Cap part #PXQ2010 has right hand threads (threads run clockwise) but that does not mean there is a left and right hand cap. You will need to check the bracket of your existing cap to see if there is a L at the end of…

view full answer...

Answer 6

Hey Christopher, the Hydrastar Disc Brake Kit #HYD44VR is not offered with Timken bearings however you can just buy the matching Timken bearing kit separately with the Timken Bearing Kit 15123/ 25580 Bearings, 15245/25520 Races, 412920 Seal #TMK42VR.…

view full answer...

Answer 7

Hey Jason, it sounds like you're looking for the Wheel Masters Lug Nut Covers #WM9005-6. These are going to be the same 33mm jam nuts you're looking for and is sold in a set of 6.

view full answer...

Answer 8

Hey Guy, While I can't answer that directly as I don't know what axles you have, I can tell you how to figure out if the right kit for you is the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers #DE66AR. What it comes down to is…

view full answer...

Answer 9

The Andersen Ultimate part #AM3200 can work in the bed of your 2022 Ford F-350 short bed with the OEM rail kit as long as you use the OEM Ford Rail Kit Adapter part #RP30156 but in general this is more of an adapter so we don't list it in the…

view full answer...

Answer 10

The Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Right Thread #PXQ2020XL fits the rear motorhome wheels that has a hub diameter of 8-1/4 inches and a bolt pattern of 10 on 285 millimeters. When it comes to the…

view full answer...

Answer 11

Hey Steve, I'll need you to take a measurement of your wheel's pilot hole, which is what these center caps slip through. There's some pretty specific sizing for these so it's best to get a precise measurement to ensure fitment. Also,…

view full answer...

Is the Bracket for the Rear Hub Cover Bolt on 2007 Winnebago Tour 40TD Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching