Replacement Left Thread Mounting Bracket For 2012 Fleetwood Expedition On Freightliner Chassis

Updated 09/23/2024 | Published 08/08/2024

Question:

I have a 2012 Fleetwood Expedition on a Freightliner XC chassis. I would like to replace the Hub Cover and the Nut/Bolt on the left rear Wheel. I would also need a bracket that attaches to the axle. I do not know the axle size or how to measure it. According to Phoenix, its either a 6 1/2 or 8 1/4 inch axle. My Wheels are 10 lug Accuride. In the picture, the Yellow circled nut is stripped. The red circled axle nuts are 7 inches apart and hold the bracket on. I do know the distance of the diameter of the bolts and nuts that hold the bracket on. It is not in your description for either bracket. That distance is 7 inches. Which axle is this? Or which hub cover kit with bracket, nut/bolt and cover do I need? Also of note, this is left hand thread. Thank you.

asked by: Rick P

Wheel nut/bolt
(click to enlarge)

Expert Reply:

Hello Rick. I pulled one of the Replacement Left Thread Mounting Bracket for Phoenix USA Wheel Center Caps # PHX77FR from our warehouse to measure. The center hole to center hole measurement is 7" as you can see in the diagram below. This is the LH thread model so it sounds like this will work for you.

expert reply by: Jesse M