Replacement Wheel Center Cap For 10 Lug Rear Wheel On Freightliner Itasca RV

Updated 08/24/2021 | Published 08/23/2021

Question:

We recently lost our rear curbside/passenger side wheel hub cover on our 2009 freightliner Itasca Meridean motor home. The wheel is a 10 lug, the remaining hub cover seems to have all the same types of attachments that part #PXQ2020XL has. The small cover with the bolt in it seems to have broken off because the attachment part is still attached to two lugs on our wheel as this part shows needing to be attached. Can you possibly help me in deciding if this is indeed the part I need for my motor home.

asked by: Stephanie W

Helpful Expert Reply:

It definitely sounds like you are needing something like Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Right Thread # PXQ2020XL. Just a few things to check to confirm fitment, this fits 10 lug on 285mm pattern and fits 8-1/4" hubs. It includes the small cover with the bolt in it and also the mounting bracket with the two mounting holes like you mentioned. This closely matches what you have described, but just to be sure I would measure to verify your setup matches specs for this cover. attached a demonstration video for you.

expert reply by: Andrew N