How Long Are the Replacement T-Bolt for Brophy Camper Tie-Downs

Question

Question:

The BR2007 are 6-inches long correct? What is the length of the T-Bolts that come in the box. I have two that are too short.

asked by: Doug

0

Expert Reply:

The Replacement T-Bolt for Brophy Camper Tie-Downs part # BR2007 are indeed 6" long end to end. If you can tell me exactly which kit you have I would be glad to inform of the included t-bolt length.

expert reply by: Conner L

0

How Long Are the Replacement T-Bolt for Brophy Camper Tie-Downs
(click to enlarge)

Answer 1

The Brophy Clamp On Camper Tie-Downs #HSSF will have a very slight amount of play since there is a compressible pad to prevent scratches on the bedrails, but it sounds like you're having much more significant play. I've attached a picture…

view full answer...

Answer 2

Hey Richard, welcome back. Those are vent holes on the back of the JR Products Vertical 2-Stage Propane Regulator item #37207-30365. They balance internal pressure and also serve as a relief opening in case of overpressure. The 2-Stage Propane…

view full answer...

Answer 3

Hey Luke! It may be possible to replace your Dometic 300 series with the Seaflo Ceramic RV Toilet w/ Sprayer Attachment #SE42MR but you will need to measure to be sure. This toilet requires a rough-in measurement of 10" for installation. This is…

view full answer...

Answer 4

Hey Dennis, The bracket the mounts to the trailer wall would need to be installed at the factory and unfortunately isn't an option aftermarket. These are relatively new so I'm assuming after enough people complain to Lippert they'll start…

view full answer...

Answer 5

Hello John, You didn't really give me much to go on, so if the Replacement T-Bolt for Brophy Camper Tie-Downs - Qty 4 #BR2007 happens to be the right T-Bolts, I think I need to quit my day job and become a psychic. Most likely that is not going…

view full answer...

Answer 6

We do have a replacement T-bolt available for the Brophy Camper Tie-Downs part #HSAB, part #HSBP, part #HSCP, part #HSSF or part #HSWB. The replacement T-Bolts are part #BR2007 and only come in a pack of four. I have attached an installation video of…

view full answer...

Answer 7

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

How Long Are the Replacement T-Bolt for Brophy Camper Tie-Downs

Product Page this Question was Asked From

Continue Researching