Replacement Brake Assemblies for 2005 Keystone Hornet with 3500 lb AL KO Axles
Published 10/27/2021
Products Featured in This Question
Question:
Im trying to figure out which part numbers I would need for a complete brake job drums, bearings, e-brakes, etc. on my 2005 two axle Keystone Hornet. The axles are Al-Ko T35 7 or J35 7. The stamps are hard to read, but neither one cross-references. So far, Ive got the drum number, Dexter 8-247, 4-1/2 BC. They appear to be EZ lube. I am not sure where to get the e-brake part numbers. Thanks.
asked by: Mike H
Expert Reply:
The 3,500 lb Al Ko axles use standard 4 bolt mounting flange brake assemblies so you could easily use the part # AKEBRK-35-SA for a set of self adjusting brake assemblies to replace what you have now.
Then for the hub/drums you are looking for you'd want the # 8-247-50UC3-EZ and you'd be set.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer brakes
- Video: A Closer Look at the Mounting Bolts and Hardware for 10" Single Brake Assembly
- Search Results: 3500 bearing kit
- Shop: Mounting Bolts and Hardware for 10" Brake Assemblies
- Shop: Mounting Bolts and Hardware for 10" Single Brake Assembly
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: LED Clearance or Side Marker Trailer Light w/ Reflector Spec Review
- Video: Breaking Down the LED Clearance or Side Marker Trailer Light w/ Reflector
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Recommended Trailer Brakes For An AL-KO T35 Axle On A 2008 Springdale RD179
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum
- Q&A: How To Tell The Difference From Right and Left Electric Brake Assemblies
- Q&A: Do Hubs Need to be Replaced When Replacing Trailer Brakes
- Video: Brake Flange Stud Spec Review
- Video: Review of etrailer Trailer Brakes - Drivers Side Brake Assembly - AKEBRK-35L-SA
- Video: An In-Depth Look at the Mounting Bolts and Hardware for 12" Single Brake Assembly
- Video: Let’s Check Out the Mounting Bolts and Hardware for 10" Brake Assemblies
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer hubs and drums
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Hubs and Drums
