Does the Optronics LED Trailer Clearance Light Come with Mounting Hardware?

Question

Question:

Does etrailer sell the mounting hardware for this light?

asked by: Jessie

0

Expert Reply:

The Optronics LED Trailer Clearance or Truck Cab Light - Submersible - 15 Diodes - Triangle - Amber Lens item # CBL22AB does not come with the mounting hardware. I have attached a diagram showing the dimensions of the lights and the mounting holes. We do not sell the screws you will need to attach this light to your trailer but you should be able to pick them up at your local hardware store.

expert reply by: Jerred H

0

dimensions
(click to enlarge)

Answer 1

LED clearance light #CBL22AB is not DOT rated as a turn signal so I do not recommend using it. LED light #STL72AB can be used as a turn signal. It is one of the smaller options at 6-7/16" Long x 2-5/16; tall x 1-3/4" thick. Used with…

view full answer...

Answer 2

The closest LED light that we have to the #M116A is the Triangular LED Trailer Clearance and Side Marker Light or Truck Cab Light, 15 Diode - Amber #CBL22AB. This has a wider design and is not reflective. This is a very nice light that I recommend if…

view full answer...

Answer 3

Yes, the Optronics LED Trailer Clearance or Truck Cab Light part #CBL22AB does come with a thick foam mounting gasket which I have pointed out for you in the attached photo.

view full answer...

Answer 4

The Truck Clearance and Cab Marker Light - Incandescent - Triangle - Amber Lens #CB22AB is a sealed light so there is not a replacement bulb option. Since you want a LED option, I recommend the LED Trailer Clearance or Truck Cab Light - Submersible -…

view full answer...

Answer 5

I think I have the perfect light for you. Take a look at the LED amber clearance light #MCL49AB. This light has 14 diodes so it will be bright and you can see it straight on and from an angle. I have included a link to a video review of this light…

view full answer...

Answer 6

Although we don't have any specifics for the lights on your 2009 Fleetwood Icon 24A I may have found a solution for you. We do have a selection of cab/clearance lights that are shaped at an angle like what it looks like on your Fleetwood. The…

view full answer...

Answer 7

For a red-lens tear-shape clearance light you can use Optronics #CB22RB or the LED version #CBL22RB. Both lights are submersible. For amber lights you can use either incandescent type #CB22AB or LED-type #CBL22AB. Hardware is not included.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Does the Optronics LED Trailer Clearance Light Come with Mounting Hardware?

Product Page this Question was Asked From

Continue Researching