How Much Does the Trailer Valet RVR9 Remote-Controlled Trailer Dolly Weigh?

Question

Question:

How much does #9000 unit weigh?

asked by: David D

0

Expert Reply:

The weight of the Trailer Valet RVR9 Remote-Controlled Trailer Dolly item # TVRVR9 is 75 lbs.

expert reply by: Jerred H

0

Answer 1

So you can use the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 you were looking at, at a maximum of 5 degrees of incline, but since your trailer is about a thousand pounds heavier than what the dolly can handle you won't be able to…

view full answer...

Answer 2

Yes, the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 will climb a loading ramp like the #288-07432 into the back of your truck. I confirmed this with Trailer Valet to ensure that it did not have an out of level sensor that would stop…

view full answer...

Answer 3

The Trailer Valet RVR9 Remote-Controlled Trailer Dolly - Wireless Remote - 9,000 lbs #TVRVR9 you were looking at is a top of the line trailer dolly that we have found to be very reliable. It is a great option for moving a trailer in hard to get to…

view full answer...

Answer 4

I recommend stepping up to the Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR due to the weight of your Airstream Globetrotter 27FBQ. This dolly is rated for trailers up to 12,000lbs and a tongue weight up to 1,200lbs. The RVR9 #TVRVR9…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Mark, thanks for writing in. I can definitely help you find the right gooseneck pin box for your Alliance, but I will tell you that typically, the height of the goosebox is very similar to the height of the pin box and 5th wheel hitch it is…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

We do! What you're looking for is the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches #RP87FR. This is the exact same setup that would have been installed on your 2022 Ford F-250 Super Duty if it had the OEM…

view full answer...

How Much Does the Trailer Valet RVR9 Remote-Controlled Trailer Dolly Weigh?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching